

Femto v1
FEMTO - RP2040 12x12mm PCB module
- Size
- 12 × 12 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 50
- Pads
- 158
- Tracks, vias
- 484, 38
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Aug 2022
- Updated
- 8 Dec 2022
Overview
Femto v1 is an open-source printed circuit board by mfolejewski, from the mfolejewski/FEMTO repository on GitHub. It is a 4-layer board of 12 × 12 mm with 26 parts on 50 nets, routed with 484 tracks and 38 vias.
It is built around the RP2040, W25Q16JVUXIQ and RC0402FR-0710KL, with the ECS-120-12-36-AGN-TR3 among its other parts. Its parts include 15 capacitors, 6 resistors, 2 ICs, 1 diode and 1 crystal. It belongs with the RP2040 boards of this library.
Main components
4RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASHRC0402FR-0710KL
UncategorisedUnknown makerECS-120-12-36-AGN-TR3
SMD2520-4P-40℃~+85℃ 12MHz 12pF 150Ω ±25ppm ±30ppm SMD2520-4P Crystals ROHSECSCrystals
README
readme.mdFemto - RP2040 12x12mm PCB module
Description
Femto is a ultra compact Raspberry Pi RP2040 module, which has features, as following:
- small footprint 12x12mm,
- all 30 GPIO pins connected,
- stamp form factor,
- 4-layer PCB board,
- onboard: QSPI Flash (USON8 package), 12MHz oscillator, PWR LED,
- fully open source project (OSHW).
Here you can find:
- \Photos: a few pictures of the assembled PCB boards
- \Python: simple script do test Femto module using Femto Tester board (use Thonny IDE)
- \manufacturing_files: all the production files for ordering PCB and assembly at JLCPCB (Gerber files, Pick & Place, BOM, etc.)
- \source_files: source files in Kicad and Altium Designer format
The main goal and reason to create this project was attempt to design as smallest as possible, and fully functional RP2040 module. Please note, that RP2040 MCU nas 7x7mm package, and Femto module has only a bit more, 12x12mm. In comparision, closer competitiors, such as Raspberry Pi Pico or RP2040 Stamp (Solder Party) have appropriately 51x21mm and 25x25mm.
The project consists of 3 parts:
- Module (mainboard)
- frame (solder frame)
- tester (testbench, only for functional verification)
License
Project published as Open Source Hardware (OSHW) under CERN OHL v1.2 (Open Hardware Licence).

Project has been certified as Open Source Hardware by the Open Source Hardware Association (OSHWA).
UID is: PL000009

https://certification.oshwa.org/pl000009.html
Press release:
Photos
Raspberry Pico and Femto Module v1:

Femto Module:

Femto Frame:

Femto Tester:

Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | MirFol_db_local.DbLib:CAP_0402_R | C3, C7, C8, C9, C10, C11, C12, C13, C14 |
| 4 | 2.2uF | MirFol_db_local.DbLib:CAP_0402_R | C4, C15, C16, C17 |
| 2 | 10k | MirFol_db_local.DbLib:RES_0402_R | R3, R4 |
| 2 | 15pF | MirFol_db_local.DbLib:CAP_0402_R | C5, C6 |
| 2 | 1k | MirFol_db_local.DbLib:RES_0402_R | R5, R6 |
| 1 | 100R | MirFol_db_local.DbLib:RES_0402_R | R7 |
| 1 | 12.000MHz | Pineberry_Lib.PcbLib:OSC_2520_4P_250X200H50_R | X1 |
| 1 | 2k | MirFol_db_local.DbLib:RES_0402_R | R33 |
| 1 | LGA40 Module (Reversed!) | Pineberry_Lib.PcbLib:PCB_LGA40_120X120_P100_REV | MOD1 |
| 1 | RP2040 | MirFol_db_local.DbLib:ICC_QFN56_700X700X90_P40_EP_RP2040 | U1 |
| 1 | Red | Pineberry_Lib.PcbLib:LED_0402_R | LED26 |
| 1 | W25Q16JV | USON8_footprint.PcbLib:ICC_USON8_200X300X55P50_EP | U2 |
More from mfolejewski/FEMTO
1- 2 layers35 × 40 mm

Similar boards
- 2 layers130 × 51 mm

OSUMGP RP2040
NickGuyver/OSUMGP-RP2040
KiCanvas link so you don't have to download to just review the files is here
92 parts18CC-BY-4.0 - 2 layers21 × 51 mm

- 4 layers22 × 20.8 mm

ProPico
SunnyYoshimitsu/Reconfigurable-Space-Compute-Cluster
Here will be the repository for an "extremely reconfigurable satellite" aimed toward at competing in NASA Minds and hopefully assist Artemis in its missions.
39 parts3 - 4 layers16.5 × 16.5 mm

Rpcube
diminDDL/rpcube
An all in one small BGA package containing an RP2040, easing the integration of an RP2040 into your design.
90 parts5MIT - 2 layers57 × 63 mm

- 4 layers88 × 54 mm

Defcon badge
LastZactionHero/defcon-silent-disco
RP2040-based DEF CON silent disco badge — KiCad project + tooling
81 parts - 4 layers42 × 42 mm

Smol servo rp nodrv
dognotdog/smol_servo
circuitry and software for controlling NEMA17 size brushless motors and stepper motors as servos.
91 parts5 - 4 layers22.9 × 61 mm

Questions
How big is the Femto v1 PCB?
It measures 12 × 12 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Femto v1 use?
26 parts, built around the RP2040, W25Q16JVUXIQ, RC0402FR-0710KL and ECS-120-12-36-AGN-TR3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Femto v1 KiCad files?
From the mfolejewski/FEMTO repository on GitHub, at the commit this page was made from: the board is source_files/Kicad/Module/Femto_v1.kicad_pcb and its schematic source_files/Kicad/Module/Femto_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Femto v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mfolejewski before reusing the design.