
JPL MP3 circuit
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Dual PMOD module for WCH CH132H (USB PHY)
CH132 PMOD is an open-source printed circuit board by metro94, from the metro94/CH132_PMOD repository on GitHub. It is a 4-layer board of 36.8 × 43.2 mm with 51 parts on 46 nets, routed with 196 tracks and 69 vias.
It is built around the CH132H. Its parts include 8 resistors, 5 connectors, 2 capacitors, 1 IC and 1 diode. It belongs with the fPGA and programmable logic boards of this library.
Used for testing WCH CH132H. Test passed for Lattice ECP5 FPGA.
Compatible with Digilent PMOD specification (300 mil apart).
The trace lengths of ULPI signals are NOT the same. It's not that it can't be used, right?

| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 56kΩ/NC | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 1μF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 5.1kΩ/NC | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7 |
| 2 | Conn_02x06_Top_Bottom | Connector_Pmod:Pmod_Dual | J1, J2 |
| 2 | G*** | kibuzzard-62DB6D54 | kibuzzard-62DB6D54, kibuzzard-62DB6D54 |
| 2 | G*** | kibuzzard-62DB6D44 | kibuzzard-62DB6D44, kibuzzard-62DB6D44 |
| 1 | 100Ω/NC | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 30kΩ/NC | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | CH132H | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm | U1 |
| 1 | Conn_02x02_Top_Bottom | EdgePads:EdgePads_01x02_Open | J5 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | G*** | kibuzzard-62DB8417 | kibuzzard-62DB8417 |
| 1 | G*** | kibuzzard-62DB6F58 | kibuzzard-62DB6F58 |
| 1 | G*** | kibuzzard-62DB724E | kibuzzard-62DB724E |
| 1 | G*** | kibuzzard-62DB6E72 | kibuzzard-62DB6E72 |
| 1 | G*** | kibuzzard-62DB6C9E | kibuzzard-62DB6C9E |
| 1 | G*** | kibuzzard-62DB6C88 | kibuzzard-62DB6C88 |
| 1 | G*** | kibuzzard-62DB6C95 | kibuzzard-62DB6C95 |
| 1 | G*** | kibuzzard-62DB6E8D | kibuzzard-62DB6E8D |
| 1 | G*** | kibuzzard-62DB6F29 | kibuzzard-62DB6F29 |
| 1 | G*** | kibuzzard-62DB6F6C | kibuzzard-62DB6F6C |
| 1 | G*** | kibuzzard-62DB6EAA | kibuzzard-62DB6EAA |
| 1 | G*** | kibuzzard-62DB6291 | kibuzzard-62DB6291 |
| 1 | G*** | kibuzzard-62DB6F17 | kibuzzard-62DB6F17 |
| 1 | G*** | kibuzzard-62DB60FD | kibuzzard-62DB60FD |
| 1 | G*** | kibuzzard-62DB6F64 | kibuzzard-62DB6F64 |
| 1 | G*** | kibuzzard-62DB6272 | kibuzzard-62DB6272 |
| 1 | G*** | kibuzzard-62DB6F50 | kibuzzard-62DB6F50 |
| 1 | G*** | kibuzzard-62DB6E9D | kibuzzard-62DB6E9D |
| 1 | G*** | kibuzzard-62DB6C7E | kibuzzard-62DB6C7E |
| 1 | G*** | kibuzzard-62DB7427 | kibuzzard-62DB7427 |
| 1 | G*** | kibuzzard-62DB6F73 | kibuzzard-62DB6F73 |
| 1 | G*** | kibuzzard-62DB8401 | kibuzzard-62DB8401 |
| 1 | G*** | kibuzzard-62DB6A52 | kibuzzard-62DB6A52 |
| 1 | G*** | kibuzzard-62DB6F45 | kibuzzard-62DB6F45 |
| 1 | KiCad-Logo2_5mm_SilkScreen | Symbol:KiCad-Logo2_5mm_SilkScreen | REF1 |
| 1 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | OSHW-Logo_7.5x8mm_Copper | Symbol:OSHW-Logo_7.5x8mm_Copper | REF2 |
| 1 | USB_A | Connector_USB:USB_A_CONNFLY_DS1095-WNR0 | J4 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.


dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

gcormier/esphome-pressure
esphome board with a differential pressure sensor, supporting a variety of power sources

It measures 36.8 × 43.2 mm and has 4 copper layers, 1.62 mm thick.
51 parts, built around the CH132H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the metro94/CH132_PMOD repository on GitHub, at the commit this page was made from: the board is CH132_PMOD.kicad_pcb and its schematic CH132_PMOD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask metro94 before reusing the design.