

Meshinger before autoroute
KiCad Project for the Meshinger hardware
- Size
- 65 × 58 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 59
- Pads
- 166
- Tracks, vias
- 37, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 May 2022
- Updated
- 21 May 2022
Overview
Meshinger before autoroute is an open-source printed circuit board by Meshinger, from the Meshinger/Meshinger repository on GitHub. It is a 2-layer board of 65 × 58 mm with 23 parts on 59 nets, routed with 37 tracks and 0 vias.
It is built around the SS2040FL, SKW92A and FH34SRJ-24S-0.5SH(99), with the MCH3478-TL-W and NTR2101P among its other parts. Its parts include 10 capacitors, 5 ICs, 4 connectors, 2 transistors and 1 resistor.
Main components
5SS2040FL
SOD-123FLSOD-123FL Schottky Diodes ROHSFUXINSEMISchottky DiodesSKW92A
LCC-48_25x40.5mmUncategorisedSKYLABFH34SRJ-24S-0.5SH(99)
SMD,P=0.5mm,卧贴-55℃~+105℃ 0.3mm 0.5mm 1mm 24P Double-Sided Contacts, Top and Bottom Entry Gold Phosphor bronze Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector AssembliesMCH3478-TL-W
SOT-323-3SOT-323-3 MOSFETs ROHSonsemiPre-Ordered ProductsNTR2101P
SOT-23-55℃~+150℃ 1 P-Channel 1.173nF 120mΩ@1.8V 15nC@4.5V 1V 218pF 289pF 3.7A 8V 960mW P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8, C9, C10 |
| 3 | SS2040FL | SS2040FL:SOD-123FL | U3, U4, U5 |
| 1 | 0.1uF/16V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 0.47ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 1uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 4.7uF/25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | BBQ10KBD | BBQ10KBD:BM14B(0.8)-24DS-0.4V(53) | U2 |
| 1 | Conn_02x01 | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J1 |
| 1 | FH34SRJ-24S-0.5SH(99) | FH34SRJ-24S:HRS_FH34SRJ-24S-0.5SH(99) | J3 |
| 1 | MCH3478-TL-W | MCH3478-TL-W:On_Semiconductor-MCH3478-TL-H-Manufacturer_Recommended | Q1 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Hirose_DM3D-SF | J2 |
| 1 | NTR2101P | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | SKW92A | SKW92A:SKYLAB_SKW92A | U1 |
More from Meshinger/Meshinger
1- 2 layers82.2 × 101.3 mm

Similar boards
- 4 layers76 × 20 mm

- 2 layers90 × 50 mm

USB Hub V2.0
CarosCave/4_Port_2.0_USB-Hub
You will find the: - CAD-Files in the folder KiCAD - The manufacturing files in the folder Gerber-files - The PDF documents in the folder PDF - The licence files from CERN OHL v. 1.2 under Licence
62 parts2 - 2 layers

- 2 layers165 × 70 mm

Ev charger met16
ms270169/kicad
1) Voltage transformer module does not work Wrong operation amplifier on module (OP07C instead of LM358) PCB error on R3 (see netlist-reverse-engieneered.jpg)
70 partsMIT - 2 layers65 × 65.1 mm

Base heating
NerdyProjects/HouseBusNode
(Yet another) house bus hardware based on STM32F072 and the CAN bus
90 parts8 - 2 layers156 × 116 mm

- 4 layers50 × 35 mm

- 2 layers67.9 × 131 mm

FW16 EPD
arthomnix/FW16_EPD
Touchscreen e-paper input module for Framework Laptop 16
67 parts44CC-BY-SA-4.0
Questions
How big is the Meshinger before autoroute PCB?
It measures 65 × 58 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Meshinger before autoroute use?
23 parts, built around the SS2040FL, SKW92A, FH34SRJ-24S-0.5SH(99) and MCH3478-TL-W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Meshinger before autoroute KiCad files?
From the Meshinger/Meshinger repository on GitHub, at the commit this page was made from: the board is Meshinger/Meshinger-before-autoroute.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Meshinger before autoroute design in my own project?
Its repository states no licence, so its author keeps all rights: ask Meshinger before reusing the design.