

Durra notebook
Hardware design for Durra's NoteBook (KiCad 10)
- Size
- 57.3 × 62.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 73
- Pads
- 313
- Tracks, vias
- 1,077, 185
- Pours
- 594
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 May 2026
- Updated
- 19 May 2026
Overview
Durra notebook is an open-source printed circuit board by meshalalhazmi, from the meshalalhazmi/Durra_NoteBook_HW repository on GitHub. It is a 4-layer board of 57.3 × 62.8 mm with 56 parts on 73 nets, routed with 1,077 tracks and 185 vias.
It is built around the ESP32-S3-MINI-1-N8, D3V3XA4B10LP and TLV75801PDRV, with the MMZ1608B121CTAH0, S2B-PH-SM4-TB and SPH0645LM4H-B among its other parts. Its parts include 23 resistors, 13 capacitors, 5 ICs, 5 connectors and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
7ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi ModulesD3V3XA4B10LP
UDFN2510-10-55℃~+150℃ 0.35pF 1uA 24W@8/20us 3.3V 4A@8/20us 9.4V 9V ESD Four channels IEC 61000-4-2、IEC 61000-4-5 UDFN2510-10 ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)TLV75801PDRV
WSON-6-EP(2x2)-40℃~+125℃@(Tj) 1 31uA 500mA 50dB@(1kHz) 53uVrms 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、Over Current Protection、Soft Start、Thermal Shutdown WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMMZ1608B121CTAH0
0603-55℃~+125℃ 1 120Ω@100MHz 150mΩ 600mA ±25% 0603 Ferrite Beads ROHSTDKFerrite BeadsS2B-PH-SM4-TB
2A 100V, Pitch 2.0mm, 2 Positions Disconnectable Crimp Style, SMD Male Header, Side EntryJSTUncategorisedSPH0645LM4H-B
SMDSMD Sourcing Parts ROHSKnowlesMEMS MicrophonesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R19, R21, R22, R23, R24, R25 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C5, C12 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C7, C8, C9, C14 |
| 4 | 33 | Resistor_SMD:R_0603_1608Metric | R15, R16, R17, R18 |
| 3 | 5.1K | Resistor_SMD:R_0603_1608Metric | R2, R3, R9 |
| 3 | 51 | Resistor_SMD:R_0603_1608Metric | R11, R12, R13 |
| 2 | 220pF | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | MMZ1608B121CTAH0 | MMZ1608B121CTAH0:IND_1608_TDK | L1, L2 |
| 2 | ~ | Button_Switch_SMD:SW_SPST_PTS810 | BOOT1, RESET1 |
| 2 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x22_P2.54mm_Vertical | J1, J3 |
| 1 | 100K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 10K | Library:R_0603_1608Metric | R20 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 200K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 200pF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 620K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_01x08_Pin | Library:Cart_edge_8 | J5 |
| 1 | D3V3XA4B10LP | Library:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U2 |
| 1 | ESP32-S3-MINI-1-N8 | ESP32-S3-MINI-1-N8:XCVR_ESP32-S3-MINI-1-N8 | U1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LOGO | Library:durra_kicad_logo1 | DURRA |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U5 |
| 1 | Micro_SD_Card_Det2 | Connector_Card:microSD_HC_Hirose_DM3D-SF | J4 |
| 1 | S2B-PH-SM4-TB | S2B_PH_SM4_TB:CONN_S2B-PH-SM4-TB_JST | J2 |
| 1 | SPH0645LM4H-B | SPH0645LR4H-B:MIC_SPH0645LM4H-B | MK1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | TLV75801PDRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 1 | TPD6E004RSER | TPD6E004RSER:IC_TPD6E004RSER | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | JUSB1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
Similar boards
- 4 layers25.4 × 62.7 mm

- 4 layers34 × 50 mm

ESP32 Controller
caggieb/ESP32-controller-WIP
Design of an ESP32 based controller with IMU, from PCB to software
36 parts1 - 4 layers26.4 × 56.8 mm

ESP32 Dev module
andresmoreno2702-gif/ESP32-S3-Dev-Board-Project
All KICAD Files and Schematics
26 partsMIT - 2 layers

Esp32 pcb
bobbobdude/AF1_Runiom_Project
I'm thinking that this repo can be a collection of everything we are up to with code, PCB design, 3D models and also general planning.
26 parts - 4 layers25.8 × 63 mm

Custom ESP32 S3 Mini
ChitranshChiranjeev/Custom-ESP32-S3-Mini-PCB-using-KiCad
4-layer ESP32-S3-MINI PCB designed in KiCad with USB Type-C differential routing, LDO power regulation, temperature/humidity sensing, RGB LED, and USB protection circuitry.
26 parts - 4 layers25.5 × 62.8 mm

- 4 layers25.7 × 63 mm

- 4 layers35 × 30.1 mm

HNTemperatureMonitorPCB
lyallbeveridge/HNTemperatureMonitor
A simple, quick and dirty temperature monitor. The main goal is to get an ESP32 working with Dad's API and just report numbers all the time. I will also get experience with soldering.
34 parts
Questions
How big is the Durra notebook PCB?
It measures 57.3 × 62.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Durra notebook use?
56 parts, built around the ESP32-S3-MINI-1-N8, D3V3XA4B10LP, TLV75801PDRV and MMZ1608B121CTAH0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Durra notebook KiCad files?
From the meshalalhazmi/Durra_NoteBook_HW repository on GitHub, at the commit this page was made from: the board is durra_notebook/durra_notebook.kicad_pcb and its schematic durra_notebook/durra_notebook.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Durra notebook design in my own project?
Its repository states no licence, so its author keeps all rights: ask meshalalhazmi before reusing the design.