4 layers65 × 56 mm
4 layers103.1 × 71.1 mm
Bms
membaye/bms1BMS V1
- Size
- 103.1 × 71.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 236
- Nets
- 191
- Pads
- 805
- Tracks, vias
- 1,182, 391
- Pours
- 756
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Mar 2025
- Updated
- 23 Apr 2025
Overview
Bms is an open-source printed circuit board by membaye, from the membaye/bms repository on GitHub. It is a 4-layer board of 103.1 × 71.1 mm with 236 parts on 191 nets, routed with 1,182 tracks and 391 vias.
It is built around the SN65HVD232D, LMR36510ADDA and MAX17614ATP+, with the BQ25756RRVR, ESP32-C6-MINI-1 and RAA4892042GFT#AA0 among its other parts. Its parts include 89 resistors, 83 capacitors, 11 diodes, 10 ICs and 7 connectors. It belongs with the power boards and the ESP32 and RISC-V boards of this library.
Main components
12
SN65HVD232D
SOIC-8-40℃~+85℃ 17mA 1Mbps 3.3V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
LMR36510ADDA
SOP-8-EP-40℃~+125℃@(TJ) 1 1A 1V~61.75V 26uA 4.2V~65V 400kHz Adjustable Buck Buck Built-in Yes SOP-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMAX17614ATP+
TQFN-20-EP(4x4)-40℃~+125℃ 1 1.35mA 155mΩ 4.5V~60V 65V Integrated FET Reverse current blocking、Reverse polarity protection、Overvoltage lockout、Under-voltage lockout、Over temperature protection、Short-Circuit Protection、Input debounce protection、With enable TQFN-20-EP(4x4) ORing Controllers ROHSMaxim Integrated (Analog Devices)ORing Controllers
BQ25756RRVR
VQFN-36(5x6)-40℃~+125℃ 17uA 1~14 20A 4.2V~70V Charging IC I2C Lithium Battery、LiFePO4 Battery Support VQFN-36(5x6) Battery Management ROHSTexas InstrumentsBattery Management
ESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorised
RAA4892042GFT#AA0
TQFP-64(10x10)-40℃~+85℃ 10V~65V 14 Balancing IC、Monitoring IC Lithium Battery SPI Support TQFP-64(10x10) Battery Management ROHSRenesas ElectronicsBattery Management
TLV70433DBVR
SOT-23-5-40℃~+85℃@(Ta) 1 150mA 2.5uA 24V 3.3V 330mV@(100mA) 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPS25730DREFR
QFN-38(4x6)QFN-38(4x6) USB PD ROHSTexas InstrumentsUSB PD
WAFER-PH2.0-2PWB
SMD,P=2mm,卧贴-25℃~+85℃ 1 1x2P 2 250V 2A 2P 2mm 5.6mm 7.59mm 8mm Auxiliary Solder Pin Beige Brass LCP PH Surface Mount, Right Angle Tin SMD,P=2mm,卧贴 Wire To Board Connector ROHSXUNPUWire To Board Connector
SIRA00DP
PowerPAK-SO-8-55℃~+150℃ 1 N-channel 1.35mΩ@4.5V 100A 104W 11.7nF 2.2V 220nC@10V 3.32nF 30V 360pF N-Channel PowerPAK-SO-8 MOSFETs ROHSVishay IntertechnologyMOSFETsMDA1350-100M
SMD,13.5x12.6mm10A 10uH 13A 19.2mΩ Alloy integrated molding inductor ±20% SMD,13.5x12.6mm Molding Power Inductors ROHSKOHERelecInductors (SMD)
SM15B-GHS-TB(LF)(SN)
SMD,P=1.25mm,卧贴-25℃~+85℃ 1 1.25mm 15 15P 1A 1x15P 22mm 4.13mm 4.25mm 50V Auxiliary Solder Pin GH PA9T Phosphor bronze Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1.25mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
Parts
236| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 15 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34 +13 |
| 20 | TEST POINT | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 +4 |
| 16 | 220nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29 |
| 15 | 47nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C30, C31, C32, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43, C44 |
| 11 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2, R10, R11, R12, R13, R62, R86, R87, R88, R89 |
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C6, C53, C54, C64, C65, C72, C77, C84 |
| 8 | 10 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R56, R57, R66, R67, R68, R70, R72, R73 |
| 8 | 65V TVS | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1, D3, D5, D6, D7, D8, D10, D11 |
| 7 | 1µF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C45, C48, C49, C68, C74, C75 |
| 6 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C50, C63, C69, C70, C78, C79 |
| 4 | 0.01µF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C51, C55, C58, C60 |
| 4 | 22uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4, C67, C71, C85 |
| 4 | 2P JST | footprints:CONN-SMD_2P-P2.00_XUNPU_WAFER-PH2.0-2PWB | P1, P2, P3, P4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | SiRA00DP | Package_SO:PowerPAK_SO-8_Single | Q2, Q3, Q4, Q5 |
| 3 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C10, C11 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C52, C57, C66 |
| 3 | 2.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14, R15, R16 |
| 3 | 2.2nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12, C13, C14 |
| 2 | 1.1M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R77, R79 |
| 2 | 1.5k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R84, R85 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17, R18 |
| 2 | 18.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R81, R83 |
| 2 | 2.2M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R76, R78 |
| 2 | 2.2µF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C46 |
| 2 | 3.3k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R69, R71 |
| 2 | 330pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C59, C61 |
| 2 | 470k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R80, R82 |
| 2 | 470nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C56, C62 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 2 | 5V TVS | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D2, D4 |
| 2 | 5m(shunt) | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R55, R75 |
| 2 | 80uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C73, C76 |
| 2 | Button | footprints:SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 2 | MAX17614ATP+ | Package_DFN_QFN:TQFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U8, U9 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C80 |
| 1 | 0.1µF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5 |
| 1 | 100µH ~150mA | Crystal:Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | FL1 |
| 1 | 10uH | Inductor_SMD:L_Sunlord_MWSA1205S-100 | L2 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | 13.7k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R65 |
| 1 | 15P JST | footprints:CONN-SMD_15P-P1.25_SM15B-GHS-TB-LF-SN | J3 |
| 1 | 162k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R53 |
| 1 | 190k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R60 |
| 1 | 191k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R59 |
| 1 | 198.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R51 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C81 |
| 1 | 2.28k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R52 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C47 |
| 1 | 22uH | Inductor_SMD:L_Ferrocore_DLG-0403 | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R49 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 360k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R63 |
| 1 | 38k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R54 |
| 1 | 3k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R64 |
| 1 | 43.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 500 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R50 |
| 1 | 57.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R74 |
| 1 | 66µF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8 |
| 1 | 9.4k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R58 |
| 1 | 9.5k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R61 |
| 1 | 910 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R48 |
| 1 | BQ25756RRVR | footprints:BQ25756RRVR | U6 |
| 1 | Barrel Jack | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J2 |
| 1 | DIODE | Diode_SMD:D_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D9 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U2 |
| 1 | LM66200DRLR | Package_TO_SOT_SMD:SOT-23-8 | U5 |
| 1 | LMR36510ADDA | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | NPN | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RAA489204 | footprints:QFP50P1200X1200X120-64N | IC1 |
| 1 | SN65HVD232 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | TLV70433DBVR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | TPS25730D | Package_DFN_QFN:Texas_REF0038A_WQFN-38-2EP_6x4mm_P0.4 | U7 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | jumper | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
Questions
How big is the Bms PCB?
It measures 103.1 × 71.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Bms use?
236 parts, built around the SN65HVD232D, LMR36510ADDA, MAX17614ATP+ and BQ25756RRVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bms KiCad files?
From the membaye/bms repository on GitHub, at the commit this page was made from: the board is bms.kicad_pcb and its schematic bms.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bms design in my own project?
Its repository states no licence, so its author keeps all rights: ask membaye before reusing the design.
Similar boards
- 4 layers100 × 90 mm
Nexus pear reva
aminewe898/nexus-pear-reva
NEXUS PEAR Rev A hardware design, schematics, PCB, manufacturing review exports and engineering documentation
117 partsMIT - 13 layers46.3 × 44.2 mm
Power
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
82 parts192MIT - 4 layers180 × 170 mm
Hw openmower yardforce
xtech/hw-openmower-yardforce
This repository contains the design files for a custom mainboard specifically designed for converting YardForce mowers to OpenMower
293 parts12CC-BY-4.0 - 6 layers196 × 115 mm
MonolithDev
MidwestMotorBoy/Battery-Bank
Monolith: an ultralight IP67 power bank for backpacking. 4S BAK 65E 21700 (91 Wh, under the 100 Wh airline limit), two bidirectional 100 W USB-C PD ports, Bluetooth LE (TI CC2340) with an iPhone app.
430 parts - 4 layers100 × 55 mm
PMP41115
Tim4769/usb-c-pd31-epr-charger
KiCad hardware, firmware artifacts, and validation notes for a bidirectional USB-C PD 3.1 EPR buck-boost charger targeting 240 W.
158 parts - 4 layers100 × 65 mm
Hw charger
xtech/hw-module-charger
This hardware version is in beta state. Expect for things to not work at the current state!
164 parts - 2 layers99.5 × 99.5 mm
