

My Personal notes and scripts collection for custom Arch Linux with MATE Desktop
- Size
- 28.7 × 27.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 43
- Pads
- 75
- Tracks, vias
- 94, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 Aug 2024
- Updated
- 22 Nov 2024
Overview
Chips is an open-source printed circuit board by mekatronik-achmadi, from the mekatronik-achmadi/archcustom repository on GitHub, published under the MIT licence. It is a 2-layer board of 28.7 × 27.1 mm with 12 parts on 43 nets, routed with 94 tracks and 6 vias.
It is built around the AMS1117-3.3. Its parts include 4 resistors, 2 ICs, 2 diodes, 2 connectors and 2 switches. It belongs with the computers and single-board computers boards and the STM32 boards of this library.
Main components
1README
README.mdArch Linux with MATE Desktop
My Personal lists, scripts, and configurations for my Arch Linux with MATE Desktop installation while try to be minimal as possible.

This repository store all my personal package lists, script, and configurations for my Arch Linux installation. This also store many of development work notes. If you find anything here to be useful, feel free to use as you like.
You can download and try the ISO example from My SourceForge
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 560 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | BOOT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | USER | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Chips PCB?
It measures 28.7 × 27.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Chips use?
12 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Chips KiCad files?
From the mekatronik-achmadi/archcustom repository on GitHub, at the commit this page was made from: the board is notes/examples/chips/pcb/kicad/pcb.kicad_pcb and its schematic notes/examples/chips/pcb/kicad/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Chips design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).