4 layers100 × 100 mm
2 layers184 × 67.5 mm
Streamdekc
meh2481/streamdekc1Like a streamdeck, but homemade and worse!
- Size
- 184 × 67.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 40
- Pads
- 140
- Tracks, vias
- 305, 41
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Apr 2022
- Updated
- 8 May 2022
Overview
Streamdekc is an open-source printed circuit board by meh2481, from the meh2481/streamdekc repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 184 × 67.5 mm with 31 parts on 40 nets, routed with 305 tracks and 41 vias.
It is built around the 74HC4051PW. Its parts include 9 switches, 6 ICs and 4 resistors.
Main components
1README
README.mdstreamdekc
Like a streamdeck, but homemade and worse!
Materials
Parts used:
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | DISP1, DISP2, DISP3, DISP4, DISP5, DISP6, DISP7, DISP8 |
| 8 | SW_DIP_x01 | Library:Switch_2pin_6mm_p4.5mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | Slider | Potentiometer_THT:Potentiometer_Bourns_PTA3043_Single_Slide | R1, R2, R3, R4 |
| 2 | 74HC4051P | Package_DIP:DIP-16_W7.62mm_LongPads | IC1, IC2 |
| 1 | QT_PY_L | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | U1_1 |
| 1 | QT_PY_R | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | U1_2 |
| 1 | SW_DIP_x01 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW9 |
| 1 | VOLTAGE_TRANSLATOR_L | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U2_1 |
| 1 | VOLTAGE_TRANSLATOR_R | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U2_2 |
The 27 most common of 31 parts.
Questions
How big is the Streamdekc PCB?
It measures 184 × 67.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Streamdekc use?
31 parts, built around the 74HC4051PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Streamdekc KiCad files?
From the meh2481/streamdekc repository on GitHub, at the commit this page was made from: the board is kicad/streamdekc.kicad_pcb and its schematic kicad/streamdekc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Streamdekc design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers54 × 120 mm
Kartonaut
Jan-Philipp-Munsch/kartonaut
TVC model rocket (after BPS.space Scout F): Teensy 4.1 flight firmware, mainboard spec, project log
174 partsMIT - 2 layers44.5 × 46.9 mm
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k - 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm
MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm
CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm
Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT