Skip to the content
2 layers83 × 35.5 mmActive3-rpi hub75-adapter, the printed circuit board in 3D

Active3-rpi hub75-adapter

meg768/rpi-display

Adapter PCB to support up to 3 panels ======================================

Size
83 × 35.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
59
Pads
180
Tracks, vias
702, 21
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
21 Aug 2015
Updated
2 Nov 2019

Overview

Active3-rpi hub75-adapter is an open-source printed circuit board by meg768, from the meg768/rpi-display repository on GitHub. It is a 2-layer board of 83 × 35.5 mm with 15 parts on 59 nets, routed with 702 tracks and 21 vias.

It is built around the 74HC245D. Its parts include 4 capacitors, 4 ICs, 3 connectors and 1 resistor. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

hzeller/adapter/active-3/README.md

Adapter PCB to support up to 3 panels

  • Supports up to three panel chains for newer plus models and Raspberry Pi 2 that have 40 GPIO pins.
  • Uses HCT245 to level shift signals from 3.3V to 5V and shield the Raspberry Pi GPIOs from overloading.
  • Open source KiCAD PCB EDA format.
  • (not very pretty layout, was just lazy and let the auto-router do it).
  • BOM:
    • 4x HCT245 in 20-SOIC (7.5mm package)
    • 4x 100nF ceramic capacitor (0805 package)
    • 1x 10kOhm resistor (0805 package)
    • 3x 16pin IDC (=2x8) male receptible to connect the panels.
    • 1x 40pin female connector to connect to the RPi.
  • The FAB files are provided as active-3-fab.zip

The board is also shared on OSH Park.

Preview Real World

Parts

15
QtyValueFootprintReferences
4100nCapacitors_SMD:C_0805_HandSolderingC1, C2, C3, C4
474HC245Housings_SOIC:SOIC-20_7.5x12.8mm_Pitch1.27mmU1, U2, U3, U4
3CONN_02X08Pin_Headers:Pin_Header_Straight_2x08Panel-1, Panel-2, Panel-3
2CONN_01X01Connect:1pinP2, P3
110kResistors_SMD:R_0805_HandSolderingR1
1CONN_02X20Pin_Headers:Pin_Header_Straight_2x20P1

More from meg768/rpi-display

1
  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    meg768/rpi-display

    Adapter PCB to support up to 3 panels ======================================

    2 parts

Similar boards

  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers191.8 × 121.3 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    109 parts184
  • 4 layers215 × 150 mmMackerel-30-proto, the printed circuit board in 3D

    Mackerel-30-proto

    crmaykish/mackerel-68k

    A series of single-board Motorola 68k computers with support for modern Linux

    133 parts96MIT
  • 2 layers306.1 × 130.2 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64-Home-Computer

    Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

    132 parts94
  • 2 layers36.8 × 27.9 mmPixelvationEngine V01, the printed circuit board in 3D

    PixelvationEngine V01

    Pixelvation/Pixelvation

    This GitHub repository is the current home of Pixelvation and will be updated whenever there's some significant new development.

    30 parts69
  • 4 layers188.9 × 92 mmMegaCD, the printed circuit board in 3D

    MegaCD

    Board-Folk/MegaCD-Main-BD

    Reproductions of main board PCBs for Sega's Mega CD/Sega CD add-on for the Mega Drive/Genesis console.

    132 parts60
  • 4 layers241.8 × 174.8 mmAmiga Rejuvenator, the printed circuit board in 3D

    Amiga Rejuvenator

    joethezombie/Amiga-1000-Rejuvenator

    A1000 Rejuvenator

    121 parts58
  • 2 layers208.9 × 170.8 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-3

    Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!

    207 parts54

Questions

How big is the Active3-rpi hub75-adapter PCB?

It measures 83 × 35.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Active3-rpi hub75-adapter use?

15 parts, built around the 74HC245D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Active3-rpi hub75-adapter KiCad files?

From the meg768/rpi-display repository on GitHub, at the commit this page was made from: the board is hzeller/adapter/active-3/active3-rpi-hub75-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Active3-rpi hub75-adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask meg768 before reusing the design.