

Mini synth v1
STM32 embedded system project including PCB design (KiCad) and firmware development (STM32CubeIDE).
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 55
- Pads
- 112
- Tracks, vias
- 169, 22
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Mar 2026
- Updated
- 14 Mar 2026
Overview
Mini synth v1 is an open-source printed circuit board by mechegelian, from the mechegelian/stm32-button-interface-board repository on GitHub. It is a 2-layer board with 21 parts on 55 nets, routed with 169 tracks and 22 vias.
It is built around the AMS1117-3.3. Its parts include 8 capacitors, 5 switches, 3 resistors, 2 ICs and 2 connectors. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7 |
| 5 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2, SW3, SW4, SW5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | STM32F303CCTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
What parts does the Mini synth v1 use?
21 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mini synth v1 KiCad files?
From the mechegelian/stm32-button-interface-board repository on GitHub, at the commit this page was made from: the board is stm32-button-interface-board/hardware/mini_synth_v1.kicad_pcb and its schematic stm32-button-interface-board/hardware/mini_synth_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mini synth v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mechegelian before reusing the design.