2 layers70 × 43 mm
4 layers35.6 × 39.4 mm
Can display
mck1117/can-display2- Size
- 35.6 × 39.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 56
- Pads
- 255
- Tracks, vias
- 496, 70
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Apr 2018
- Updated
- 3 May 2018
Overview
Can display is an open-source printed circuit board by mck1117, from the mck1117/can-display repository on GitHub. It is a 4-layer board of 35.6 × 39.4 mm with 41 parts on 56 nets, routed with 496 tracks and 70 vias.
It is built around the MCP2562-H/P, MIC4427ZM and TLC59284DBQ, with the L7805 among its other parts. Its parts include 12 capacitors, 12 resistors, 7 ICs, 6 connectors and 4 diodes. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
4
MCP2562-H/P
PDIP-8-40℃~+150℃ 4.5V~5.5V PDIP-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
MIC4427ZM
SOIC-80℃~+150℃ 1.5A 1.5A 18ns 2 20ns 4.5V~18V Low Side MOSFET SOIC-8 Gate Drivers ROHSMicrochip TechnologyGate Drivers
TLC59284DBQ
SSOP-24-150mil-40℃~+85℃ 10V 16 35MHz 3V~5.5V 4% 45mA Buck Built-in SSOP-24-150mil LED Drivers ROHSTexas InstrumentsLED Drivers
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C6, C8, C9, C10 |
| 3 | 10k | Resistors_SMD:R_0603 | R3, R4, R7 |
| 3 | 1k | Resistors_SMD:R_0603 | R10, R11, R12 |
| 3 | LED | LEDs:LED_0603_HandSoldering | D2, D3, D4 |
| 2 | 100k | Resistors_SMD:R_0603 | R5, R6 |
| 2 | 2.2uF | Capacitors_SMD:C_0603 | C11, C12 |
| 2 | 4.7k | Resistors_SMD:R_0603 | R8, R9 |
| 2 | Conn_01x04_Male | Connectors_JST:JST_XH_B04B-XH-A_04x2.50mm_Straight | J3, J5 |
| 1 | 120 | Resistors_SMD:R_0603 | R2 |
| 1 | 2k | Resistors_SMD:R_0603 | R1 |
| 1 | 4.7uF | Capacitors_Tantalum_SMD:CP_Tantalum_Case-B_EIA-3528-21_Wave | C7 |
| 1 | 4.7uF | Capacitors_SMD:C_0603 | C5 |
| 1 | AP2204K-3.3 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U6 |
| 1 | Conn_01x02_Male | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | J4 |
| 1 | Conn_01x04_Male | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J6 |
| 1 | Conn_01x10_Female | Socket_Strips:Socket_Strip_Straight_1x10_Pitch2.54mm | J1 |
| 1 | Conn_02x09_Odd_Even | Socket_Strips:Socket_Strip_Straight_2x09_Pitch2.54mm_SMD | J2 |
| 1 | D_Schottky | Diodes_SMD:D_SOD-123F | D1 |
| 1 | L7805 | TO_SOT_Packages_SMD:TO-252-2 | U5 |
| 1 | MCP2562 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | MCP4019 | TO_SOT_Packages_SMD:SOT-353_SC-70-5_Handsoldering | U2 |
| 1 | MIC4427 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U7 |
| 1 | STM32F429VITx | Housings_QFP:LQFP-100_14x14mm_Pitch0.5mm | U1 |
| 1 | TLC59284 | Housings_SSOP:SSOP-24_3.9x8.7mm_Pitch0.635mm | U3 |
Questions
How big is the Can display PCB?
It measures 35.6 × 39.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Can display use?
41 parts, built around the MCP2562-H/P, MIC4427ZM, TLC59284DBQ and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Can display KiCad files?
From the mck1117/can-display repository on GitHub, at the commit this page was made from: the board is hardware/can-display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Can display design in my own project?
Its repository states no licence, so its author keeps all rights: ask mck1117 before reusing the design.
Similar boards
- 2 layers55 × 485 mm
- 2 layers100 × 50 mm
- 2 layers85 × 56.5 mm
- 4 layers174 × 104 mm
- 2 layers267 × 300 mm
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98 - 4 layers135 × 82.5 mm
- 2 layers99.1 × 99.1 mm
