

Digital voltmeter
STM32-based Digital Voltmeter PCB designed in KiCad with Embedded C firmware.
- Size
- 91.3 × 77.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 49
- Pads
- 117
- Tracks, vias
- 283, 37
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Aug 2026
- Updated
- 1 Aug 2026
Overview
Digital voltmeter is an open-source printed circuit board by mayurdhang031, from the mayurdhang031/Digital-Voltmeter-STM32 repository on GitHub. It is a 2-layer board of 91.3 × 77.9 mm with 21 parts on 49 nets, routed with 283 tracks and 37 vias.
It is built around the AMS1117-3.3. Its parts include 8 capacitors, 5 resistors, 3 ICs, 2 connectors and 1 switch. It belongs with the STM32 boards of this library.
Main components
1README
README.mdDigital Voltmeter using STM32
Overview
A digital voltmeter PCB designed using KiCad and based on the STM32 microcontroller. The system measures DC voltage and displays the measured value in real time.
Features
- STM32 Microcontroller
- DC Voltage Measurement
- KiCad PCB Design
- 2-Layer PCB
- Embedded C Firmware
Software Used
- KiCad
- STM32CubeIDE
- Embedded C
Hardware
- STM32 Microcontroller
- Voltage Divider Circuit
- Resistors
- Capacitors
- Crystal Oscillator
- Power Supply
Repository Contents
- Schematic (.kicad_sch)
- PCB Layout (.kicad_pcb)
- KiCad Project (.kicad_pro)
Images
- PCB Layout
- 3D PCB View
- Schematic
Author
Mayur Dhang
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C5, C6 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R5 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 22pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C7, C8 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | 68k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | RC1602A | Display:RC1602A | U3 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Similar boards
- 2 layers290.1 × 130 mm

- 2 layers26.2 × 45.5 mm

PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm

PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm

- 4 layers100 × 54 mm

32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm

- 2 layers78 × 60 mm

- 2 layers59.1 × 99.9 mm

Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the Digital voltmeter PCB?
It measures 91.3 × 77.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Digital voltmeter use?
21 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Digital voltmeter KiCad files?
From the mayurdhang031/Digital-Voltmeter-STM32 repository on GitHub, at the commit this page was made from: the board is digital voltmeter.kicad_pcb and its schematic digital voltmeter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Digital voltmeter design in my own project?
Its repository states no licence, so its author keeps all rights: ask mayurdhang031 before reusing the design.