

Roller blade
Roller blade PCBs
- Size
- 41.6 × 58.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 36
- Pads
- 167
- Tracks, vias
- 353, 28
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Feb 2018
- Updated
- 11 Apr 2018
Overview
Roller blade is an open-source printed circuit board by maxschommer, from the maxschommer/RollerBlades repository on GitHub. It is a 2-layer board of 41.6 × 58.6 mm with 48 parts on 36 nets, routed with 353 tracks and 28 vias.
It is built around the ATMEGA328-AU and MAX7036GTP+. Its parts include 29 capacitors, 5 resistors, 4 ICs, 4 connectors and 2 inductors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX7036GTP+
TQFN-20-EP(5x5)TQFN-20-EP(5x5) RF Transceiver ICs ROHSMaxim Integrated (Analog Devices)RF Transceiver ICs
README
RecieverAndController/README.mdRollerBlades
Roller blade PCBs
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitors_SMD:C_0603 | C18, C19, C20, C21, C26, C27, C28 |
| 4 | .1uF | Capacitors_SMD:C_0603 | C4, C11, C16, C17 |
| 3 | 100pF | Capacitors_SMD:C_0603 | C2, C3, C15 |
| 3 | 10pF | Capacitors_SMD:C_0603 | C10, C13, C14 |
| 3 | Conn_01x03 | Pin_Headers:Pin_Header_Angled_1x03_Pitch2.54mm | J1, J3, J4 |
| 2 | 18pF | Capacitors_SMD:C_0603 | C22, C23 |
| 2 | 1nF | Capacitors_SMD:C_0603 | C24, C25 |
| 2 | 1uF | Capacitors_SMD:C_0603 | C7, C29 |
| 1 | .01uF | Capacitors_SMD:C_0603 | C8 |
| 1 | 10 | Resistors_SMD:R_0603 | R4 |
| 1 | 10k | Resistors_SMD:R_0603 | R3 |
| 1 | 13.56MHz | Custom:1253-1737-1-ND | Y2 |
| 1 | 15nH | Inductors_SMD:L_0603 | L2 |
| 1 | 16MHz | Custom:SER3686DKR-ND | Y1 |
| 1 | 180pF | Capacitors_SMD:C_0603 | C6 |
| 1 | 2.7pF | Capacitors_SMD:C_0603 | C1 |
| 1 | 220kOhm | Resistors_SMD:R_0603 | R2 |
| 1 | 220pF | Capacitors_SMD:C_0603 | C12 |
| 1 | 22kOHM | Resistors_SMD:R_0603 | R1 |
| 1 | 22pF | Capacitors_SMD:C_0603 | C9 |
| 1 | 390pF | Capacitors_SMD:C_0603 | C5 |
| 1 | 47nH | Inductors_SMD:L_0603 | L1 |
| 1 | 50 | Resistors_SMD:R_0603 | R5 |
| 1 | AP2204_3V3 | TO_SOT_Packages_SMD:SOT-23-5 | U4 |
| 1 | ATMEGA328-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | Antenna | Custom:311-1570-1-ND | AE1 |
| 1 | Conn_02x03_Counter_Clockwise | Pin_Headers:Pin_Header_Angled_2x03_Pitch2.54mm | J2 |
| 1 | MAX7036 | Custom:MAX7036GTP | U2 |
| 1 | MLX90365 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | SW_DIP_x01 | Custom:CKN10291CT-ND | SW1 |
More from maxschommer/RollerBlades
1- 2 layers31.8 × 57.1 mm

Similar boards
- 2 layers82 × 120 mm

Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.
66 parts467 - 2 layers76.2 × 76.2 mm

PaperBack Converter
dqydj/PaperBack_EPaper_Display
Internet Connected or Standard Input EPaper Display
92 parts83MIT - 2 layers18 × 33.2 mm

Arduino pro mini
etimou/arduino-pro-mini-kicad
This is a clone of the well known arduino board "pro-mini" designed in kicad while the original was designed in eagle. Ref https://store.arduino.cc/arduino-pro-mini
23 parts69 - 2 layers101.6 × 147.3 mm

Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 4 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 70 mm

- 2 layers52.6 × 45.6 mm

Questions
How big is the Roller blade PCB?
It measures 41.6 × 58.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Roller blade use?
48 parts, built around the ATMEGA328-AU and MAX7036GTP+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Roller blade KiCad files?
From the maxschommer/RollerBlades repository on GitHub, at the commit this page was made from: the board is RecieverAndController/roller_blade.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Roller blade design in my own project?
Its repository states no licence, so its author keeps all rights: ask maxschommer before reusing the design.