2 layers22.4 × 18.5 mm
4 layers58.4 × 25.4 mm
Csi2usb
matyay/csi2usb19A CSI to USB "converter" using a Cypress CX3 chip
- Size
- 58.4 × 25.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 122
- Nets
- 100
- Pads
- 499
- Tracks, vias
- 1,629, 239
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Jun 2020
- Updated
- 21 Jun 2020
Overview
Csi2usb is an open-source printed circuit board by matyay, from the matyay/csi2usb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 58.4 × 25.4 mm with 122 parts on 100 nets, routed with 1,629 tracks and 239 vias.
It is built around the 74LVC2G17GW, 74LVC1G157GV and NCP361SN, with the SP3010-04UTG, USBLC6-2P6 and AO3401A among its other parts. Its parts include 46 capacitors, 41 resistors, 13 ICs, 8 inductors and 7 connectors.
Main components
6
74LVC2G17GW
SOT-363-40℃~+125℃ 1 1.65V~5.5V 10uA 2 24mA 24mA 5.4ns@3.3V,50pF 74LVC Schmitt trigger Unidirectional SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, Transceivers
74LVC1G157GV
TSOP-6-1.5mm-40℃~+125℃ 1.65V~5.5V 2.7ns@3.3V,50pF 2/1 32mA 32mA 4uA 74LVC Multiplexer Power-off protection、Level shifting Single Supply TSOP-6-1.5mm Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches, Multiplexers, Decoders
NCP361SN
TSOP-5-1.5mm-40℃~+85℃ 1 1.2V~20V 600mA Active Low 过压保护、欠压锁定、Overcurrent Protection、Over temperature protection TSOP-5-1.5mm Power Distribution Switches ROHSonsemiPower Distribution Switches
SP3010-04UTG
UFDFN-10(1x2.5)-40℃~+125℃@(Tj) 0.45pF 100nA 12.3V 3A@8/20us 6V Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS UFDFN-10(1x2.5) ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
122| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10k | CSI2USB:R_0603_1608Metric | R7, R8, R9, R12, R23, R24, R25, R27, R29, R31, R37, R38, R39 |
| 13 | 10n | CSI2USB:C_0402_1005Metric | C6, C8, C10, C12, C14, C17, C18, C19, C20, C21, C22, C23, C24 |
| 11 | 100R | CSI2USB:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R13, R14, R15, R16, R26 |
| 11 | 100n | CSI2USB:C_0603_1608Metric | C13, C30, C33, C34, C35, C36, C37, C38, C39, C40, C47 |
| 9 | 100n | CSI2USB:C_0402_1005Metric | C1, C2, C4, C7, C9, C11, C16, C28, C29 |
| 8 | 100k | CSI2USB:R_0603_1608Metric | R17, R18, R19, R20, R21, R22, R28, R30 |
| 6 | L | CSI2USB:L_0603_1608Metric | L1, L2, L3, L4, L5, L8 |
| 5 | 0R | CSI2USB:R_0603_1608Metric | R10, R11, R32, R40, R41 |
| 5 | 74LVC1G157 | CSI2USB:SC-74-6 | U5, U6, U7, U8, U9 |
| 4 | 22u | CSI2USB:CP_EIA-3216-18_Kemet-A | C41, C42, C45, C46 |
| 3 | 22u | CSI2USB:C_0805_2012Metric | C3, C5, C25 |
| 2 | 1u | CSI2USB:C_0805_2012Metric | C27, C31 |
| 2 | 2.2u | CSI2USB:DJNR3015 | L6, L7 |
| 2 | 22p | CSI2USB:C_0603_1608Metric | C43, C44 |
| 2 | 560R | CSI2USB:R_0603_1608Metric | R35, R36 |
| 2 | AP3402 | CSI2USB:TSOT-23-6 | U11, U12 |
| 2 | LED | CSI2USB:LED_0603_1608Metric | D1, D2 |
| 1 | 15k | CSI2USB:R_0603_1608Metric | R33 |
| 1 | 19.2MHz | CSI2USB:SMD_3.2x2.5 | Y1 |
| 1 | 1u | CSI2USB:C_0603_1608Metric | C32 |
| 1 | 2.2u | CSI2USB:C_0805_2012Metric | C26 |
| 1 | 3.3k | CSI2USB:R_0603_1608Metric | R34 |
| 1 | 74LVC2G17 | CSI2USB:SC-74-6 | U10 |
| 1 | AO3401A | CSI2USB:SOT-23 | Q1 |
| 1 | CYUSB306X | CSI2USB:BGA-121_11x11_10.0x10.0mm | U1 |
| 1 | Conn_01x02 | CSI2USB:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x12 | CSI2USB:PinHeader_1x12_P2.54mm_Vertical | CON2 |
| 1 | Conn_01x15 | CSI2USB:TE_1-84952-5_1x15-1MP_P1.0mm_Horizontal | CON5 |
| 1 | Conn_01x16 | CSI2USB:PinHeader_1x16_P2.54mm_Vertical | CON1 |
| 1 | Conn_01x22 | CSI2USB:MX-52435-2271 | CON4 |
| 1 | Conn_02x05_Odd_Even | CSI2USB:PinHeader_2x05_P1.27mm_Vertical | CON6 |
| 1 | M24M02 | CSI2USB:SOIC-8_3.9x4.9mm_P1.27mm | U13 |
| 1 | NCP361 | CSI2USB:SOT-23-5 | U4 |
| 1 | SP3010-04UTG | CSI2USB:uDFN-10 | U3 |
| 1 | USB3_MICRO_B | CSI2USB:Amphenol_GSB343133HR | CON3 |
| 1 | USBLC6-2P6 | CSI2USB:SOT-666 | U2 |
The 119 most common of 122 parts.
Questions
How big is the Csi2usb PCB?
It measures 58.4 × 25.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Csi2usb use?
122 parts, built around the 74LVC2G17GW, 74LVC1G157GV, NCP361SN and SP3010-04UTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Csi2usb KiCad files?
From the matyay/csi2usb repository on GitHub, at the commit this page was made from: the board is hardware/kicad/CSI2USB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Csi2usb design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers40 × 40 mm
- 4 layers65 × 56.5 mm
- 2 layers44.5 × 57.8 mm
- 2 layers45.7 × 32 mm
- 6 layers59 × 62 mm
- 4 layers26 × 30 mm
Framework logic analyzer
JackToaster/framework_logic_analyzer
16 channel USB 3 Logic analyzer expansion card for Framework laptop
93 parts48 - 4 layers128 × 128 mm
SF 01 Compute Board
sandgum/Triangulate-SF_01-Speaker-Frame
A 24 inch Raspberry Pi-based Android digital picture frame attached to a 220W stereo Bluetooth speaker with DSP
369 parts2