Skip to the content
12345

NCP361SN

onsemiExtended

-40℃~+85℃ 1 1.2V~20V 600mA Active Low 过压保护、欠压锁定、Overcurrent Protection、Over temperature protection TSOP-5-1.5mm Power Distribution Switches ROHS

Part id
onsemi/NCP361SN
Category
Power Distribution Switches
Package
TSOP-5-1.5mm
Pins
5
In stock
6,914 at JLCPCB (C233714)
Used on
14 open-source boards

Overview

The NCP361SN is a power Distribution Switche made by onsemi in a TSOP-5-1.5mm package with 5 pins. -40℃~+85℃ 1 1.2V~20V 600mA Active Low 过压保护、欠压锁定、Overcurrent Protection、Over temperature protection TSOP-5-1.5mm Power Distribution Switches ROHS.

PCBKit's library has its KiCad symbol (Power_Protection:NCP361SN, from KiCad's library) and its footprint (Package_SO:TSOP-5_1.65x3.05mm_P0.95mm, from KiCad's library), ready for a KiCad board. 6,914 are in stock at JLCPCB (part C233714). 14 open-source boards in 6 repositories on GitHub use it.

Symbol

1IN2GND3EN4FLAG5OUT
Power_Protection:NCP361SNFrom KiCad's library

Footprint

12345
Package_SO:TSOP-5_1.65x3.05mm_P0.95mmFrom KiCad's library

Pinout

5
The pins of the NCP361SN
PinNameType
1INPower in
2GNDPower in
3ENInput
4FLAGOpen collector
5OUTPower out

Open-source boards using it

14See all 14
  • 4 layers58.4 × 25.4 mmCsi2usb, the printed circuit board in 3D

    Csi2usb

    matyay/csi2usb

    A CSI to USB "converter" using a Cypress CX3 chip

    122 parts19GPL-3.0
  • 2 layers22.4 × 18.5 mmHelix Daughterboard, the printed circuit board in 3D

    Helix Daughterboard

    luantty2/Helix-Daughterboard

    Helix daughterboard docs.

    13 parts2MIT
  • 4 layers40 × 40 mmTouchpadAdapter, the printed circuit board in 3D

    TouchpadAdapter

    Michael-Lloyd/fw13-touchpad-bridge

    Framework 13 Touchpad to USB bridge

    74 parts1
  • 4 layers65 × 56.5 mmObc drone hat, the printed circuit board in 3D

    Obc drone hat

    vooon/obc-drone-hat

    Raspberry Pi 3B HAT with additional UART's and RTC

    69 parts1
  • 2 layers44.5 × 57.8 mmControl board, the printed circuit board in 3D

    Control board

    plertvilai/IPAX

    In situ Plankton Assemblage eXplorer

    63 parts7MIT

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the NCP361SN?

Yes. The symbol is Power_Protection:NCP361SN and the footprint Package_SO:TSOP-5_1.65x3.05mm_P0.95mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP361SN?

TSOP-5-1.5mm, with 5 pins. Its footprint is drawn on this page.

Where is the NCP361SN datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP361SN?

JLCPCB lists it as part C233714, with 6,914 in stock; the sellers' links on this page open their listings.

What can replace the NCP361SN?

Parts like it in the library: the NCP380HSN05AAT2G by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NCP361SN?

14 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.