Skip to the content
2 layers25.7 × 34.4 mmShield, the printed circuit board in 3D

Control a LED strip using an ESP8266, PWM, an N-Channel MOSFET, a rotary encoder and some Micropython

Size
25.7 × 34.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
27
Pads
96
Tracks, vias
214, 14
Pours
5
Routed
Yes
KiCad
KiCad 4
Created
28 May 2017
Updated
28 Apr 2018

Overview

Shield is an open-source printed circuit board by mattytrentini, from the mattytrentini/led_strip repository on GitHub, published under the MIT licence. It is a 2-layer board of 25.7 × 34.4 mm with 47 parts on 27 nets, routed with 214 tracks and 14 vias.

It is built around the LM1117-3.3. Its parts include 6 resistors, 5 capacitors, 5 connectors, 3 transistors and 1 IC. It belongs with the lEDs and displays boards of this library.

Main components

1

README

shield/README.md

LED Strip Driver WeMos D1 Mini Shield

These are the KiCad design files for a Shield for the WeMos D1 Mini that can be used to drive LED strips.

This is designed to be a compact, reusable, versatile, and web-connected design to allow for quick lighting solutions, as well as other simple, relatively high current generic driving applications.

The template for the WeMos D1 Mini shield came from jerome-labidurie's Kicad tools for Wemos D1 mini.

Parts

47
QtyValueFootprintReferences
24custom_footprints:35-6-stitching-via, , , , , , , , , , , , , , , +8
3100nFCapacitors_SMD:C_0805_HandSolderingC2, C4, C5
3220RResistors_SMD:R_0805_HandSolderingR1, R2, R3
327kResistors_SMD:R_0805_HandSolderingR4, R5, R6
3Q_NMOS_GSDcustom_footprints:SOT-23_HandsolderingQ1, Q2, Q3
2CONN_01X08D1_mini:D1_mini_Pin_HeaderP1, P2
110uFCapacitors_SMD:C_0805_HandSolderingC1
122uFCapacitors_SMD:C_0805_HandSolderingC3
1Dcustom_footprints:D_SMB-SMC_Universal_HandsolderingD1
1LM1117-3.3SOT-223U1
1OSHWD1_mini:OSHW
1ROTARY-ENCODERcustom_footprints:SF-ROTARY-ENCODERROT1
1Screw_Terminal_1x02Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2polJ2
1Screw_Terminal_1x04Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_4polJ1
1Screw_Terminal_1x06Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_6polJ4

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers95.2 × 57.2 mmDomesdayDuplicator, the printed circuit board in 3D

    DomesdayDuplicator

    Domesday86/DomesdayDuplicator

    High-speed LaserDisc RF sampler

    66 parts325GPL-3.0
  • 2 layers189.5 × 204.9 mmSmartSpin2k Panelized, the printed circuit board in 3D

    SmartSpin2k Panelized

    doudar/SmartSpin2k

    Transform your spin bike into a Smart Trainer!

    749 parts292GPL-2.0
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 4 layers113.5 × 105.5 mmMultistepper, the printed circuit board in 3D

    Multistepper

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    243 parts208
  • 2 layers275 × 103 mmKeebee, the printed circuit board in 3D

    Keebee

    blakesmith/embedded

    Blake's embedded projects

    159 parts167
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0

Questions

How big is the Shield PCB?

It measures 25.7 × 34.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Shield use?

47 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shield KiCad files?

From the mattytrentini/led_strip repository on GitHub, at the commit this page was made from: the board is shield/shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shield design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).