Skip to the content
4 layers46 × 29.5 mmGlove, the printed circuit board in 3D
Size
46 × 29.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
67
Nets
52
Pads
252
Tracks, vias
694, 174
Pours
6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 May 2025
Updated
17 Jul 2026

Overview

Glove is an open-source printed circuit board by matthewlai, from the matthewlai/GloveElectronics repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 46 × 29.5 mm with 67 parts on 52 nets, routed with 694 tracks and 174 vias.

It is built around the ESP32-C3-WROOM-02-H4, TP4054 and XC6220B331MR, with the TS-1187A-B-A-B among its other parts. Its parts include 22 capacitors, 20 resistors, 8 ICs, 4 diodes and 4 connectors. It belongs with the ESP32 and RISC-V boards of this library.

Main components

4

Parts

67
QtyValueFootprintReferences
102.2kResistor_SMD:R_0402_1005MetricR3, R5, R6, R8, R9, R10, R11, R12, R14, R15
81uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C6, C10, C11
747uCapacitor_SMD:C_1206_3216MetricC13, C14, C17, C18, C19, C20, C21
410uCapacitor_SMD:C_0603_1608MetricC7, C8, C9, C12
4DRV2605YZFReasyeda2kicad:DSBGA-9_L1.5-W1.5-R3-C3-P0.50-BLU5, U6, U7, U9
310kResistor_SMD:R_0402_1005MetricR7, R23, R24
2100Resistor_SMD:R_0402_1005MetricR13, R16
2100nCapacitor_SMD:C_0402_1005MetricC15, C22
25.1kResistor_SMD:R_0402_1005MetricR1, R2
2MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP5, JP6
11RResistor_SMD:R_0402_1005MetricR18
122uCapacitor_SMD:C_0603_1608MetricC16
12N7002Package_TO_SOT_SMD:SOT-323_SC-70Q1
13.3kResistor_SMD:R_0402_1005MetricR4
1680Resistor_SMD:R_0402_1005MetricR17
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1Conn_01x02_Socketeasyeda2kicad:CONN-SMD_B2B-PH-SM4-TB-LF-SNJ3
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalJ2
1DNPConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1DNPlight_pipe:VLP2M1
1ESP32-C3-WROOM-02RF_Module:ESP32-C3-WROOM-02U1
1GLED_SMD:LED_0603_1608MetricD3
1PCA9546APW,118easyeda2kicad:SOP-16_L5.0-W4.4-P0.65-LS6.4-BLU3
1RLED_SMD:LED_0603_1608MetricD2
1SW_SPDTeasyeda2kicad:SW-TH_SK12D07VG3SW2
1TP4054Package_TO_SOT_SMD:SOT-23-5U8
1TS-1187A-B-A-Beasyeda2kicad:SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5SW3
1USB_C_Receptacle_USB2.0_14Peasyeda2kicad:USB-C_SMD-TYPE-C-31-M-12J1
1WLED_SMD:LED_0603_1608MetricD1
1XC6220B331MRPackage_TO_SOT_SMD:SOT-23-5U2
1YELLOWLED_SMD:LED_0805_2012MetricD6

More from matthewlai/GloveElectronics

1

Similar boards

  • 2 layers124 × 35 mmWfred rev6, the printed circuit board in 3D

    Wfred rev6

    newHeiko/wiFred

    wiThrottle-compatible hardware controller

    87 parts28GPL-3.0
  • 2 layers17.8 × 33.1 mmKimiro, the printed circuit board in 3D

    Kimiro

    kien242/Kimiro-nRF52840

    28 partsMIT
  • 4 layers33 × 77 mmELEC3885, the printed circuit board in 3D

    ELEC3885

    frankplow/ELEC3885

    A robust and lightweight helmet-mounted safety camera for cycling

    115 parts
  • 4 layers56 × 28 mmBx tacho, the printed circuit board in 3D

    Bx tacho

    dazchi/bx-tacho

    Open DIY Beyblade X launcher RPM meter: ESP32-C3 with IR sensors and an OLED, Bluetooth (Battle Pass protocol), and a browser app for shot data and firmware updates. KiCad hardware, ESP-IDF firmware, 3D-printed case.

    51 parts3GPL-3.0
  • 4 layers26.8 × 47.6 mmSnapCore Devboard Rev1, the printed circuit board in 3D

    SnapCore Devboard Rev1

    Magnetile/magnetile-hardware

    A open source modular wireless input device. Based on nRF52840

    63 partsMIT
  • 2 layers86.5 × 27.5 mmComfospot50 full, the printed circuit board in 3D

    Comfospot50 full

    cornim/comfospot50

    The schematic and PCB in this directory are the project-authored controller board design. The board is intended to interface an ESP32-C3 with the existing ComfoSpot panel.

    29 parts4GPL-3.0
  • 2 layers88 × 89.5 mmESP32 C3 MINI, the printed circuit board in 3D

    ESP32 C3 MINI

    minhtenlado/esp32-4-channel-relays-temp

    ⚡ Open-source ESP32 4-Channel Opto-Isolated Relay Controller board designed in KiCad.

    74 parts
  • 2 layersLED Coaster, the printed circuit board in 3D

    LED Coaster

    Olivermoberg98/LED-Coaster

    Battery-powered RGB LED drink coaster: ESP32-C3 firmware, Android BLE app, KiCad PCB and 3D-printed enclosure

    84 partsMIT

Questions

How big is the Glove PCB?

It measures 46 × 29.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Glove use?

67 parts, built around the ESP32-C3-WROOM-02-H4, TP4054, XC6220B331MR and TS-1187A-B-A-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Glove KiCad files?

From the matthewlai/GloveElectronics repository on GitHub, at the commit this page was made from: the board is Glove.kicad_pcb and its schematic Glove.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Glove design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).