
USMU v10
joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

ADC: ADS1115 - 16 bits
RPI ADS1155 is an open-source printed circuit board by matiasmollecker, from the matiasmollecker/RPI_AUX_BOARD_TDII repository on GitHub. It is a 2-layer board of 84.6 × 56 mm with 29 parts on 45 nets, routed with 269 tracks and 2 vias.
It is built around the ADS1115IDGS. Its parts include 14 resistors, 8 diodes, 3 connectors, 3 switches and 1 IC.
This is an auxiliary board designed to be mounted on Raspberry Pi models 3, 3 B+, 4 B, and 5. It includes LEDs, buttons, and a DIP switch to facilitate GPIO management.
For ADC functionality, I recommend using the ADS1115.
This board is particularly useful for carrying out practical work related to the subject Técnicas Digitales II (TDII) in 2024.





Developed by Matías Mollecker.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R11, R12, R13, R14 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H9.5mm | SW2, SW3 |
| 1 | ADS1115IDGS | my_pretty_componets:Adafruit_ADS1115_modular | U1 |
| 1 | ANALOG_PINS | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Raspberry_PI_4 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_SMD | J1 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | UART_PINS | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J4 |

joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

dridri/bcflight
Raspberry Pi based drone flight controller and remote control

Bylin-code/Stradex1
STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…


luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.

doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.


joeltroughton/nanoAmmeter
A small ammeter for measuring printed glucose biosensors
It measures 84.6 × 56 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ADS1115IDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the matiasmollecker/RPI_AUX_BOARD_TDII repository on GitHub, at the commit this page was made from: the board is RPI_ADS1155.kicad_pcb and its schematic RPI_ADS1155.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask matiasmollecker before reusing the design.