
IVmeasurement
mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.
IVmeasurement is an open-source printed circuit board by mathiasscroccaro, from the mathiasscroccaro/Pesquisa_Hardware repository on GitHub. It is a 2-layer board of 175.3 × 63.5 mm with 39 parts on 29 nets, routed with 312 tracks and 15 vias.
It is built around the INA128U, LM324 and IRF9540NS. Its parts include 19 connectors, 15 resistors, 2 capacitors, 2 ICs and 1 transistor.
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.
Design of a single cell I-V measurement circuit.

Design of a socket for Gansil GS8051 op. amp.

Designs for DC-DC with at least 0,8 V for cold start.
The initial problem of this kind of circuit is the leakage current and the high switching frequency. The tricky point for correctly assemble the system is the inductors and capacitors selection: Inductos with low series resistance (<0.1 Ohm) and capacitors XR7. It's all about energy loss. All resistive component makes loss. Not only, some layout strategies may count for better performance. The preference is to keep elements of the circuit close to the IC, avoiding EMC, tracks resistance and noise at the feedback pins.
Low cost (US$0,2 at LCSC.com) Step-up converter

High cost (US$4,6 at ti.com) Energy Harvesting Power Management IC

This project is a simple socket for NRF51822 radio uC. The schematics includes programming pins, one led and a trimpot for analog read signals.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J1, J4, J5, J6, J11, J12, J13 |
| 3 | 100k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2, R7, R14 |
| 2 | 100nF | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 1M | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1, R6 |
| 2 | 51k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R4, R15 |
| 2 | Conn_01x07 | Pin_Headers:Pin_Header_Straight_1x07_Pitch2.54mm | J8, J10 |
| 1 | 100 | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R12 |
| 1 | 10k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R9 |
| 1 | 23k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R10 |
| 1 | 320k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R11 |
| 1 | 60 | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R8 |
| 1 | 609 | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R5 |
| 1 | 7.1k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R3 |
| 1 | ADC | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J9 |
| 1 | DAC | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | INA128 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | IRF9540N | TO_SOT_Packages_THT:TO-220-3_Vertical | Q1 |
| 1 | LM324 | Housings_DIP:DIP-14_W7.62mm_LongPads | U2 |
| 1 | R | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R13 |
| 1 | Sollar Cell | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Source | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J14 |
| 1 | Test VDS | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J15 |
| 1 | Test VGS | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J7 |
| 1 | baixo | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J18 |
| 1 | baixo | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J16 |
| 1 | cima | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J19 |
| 1 | cima | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J17 |

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

mathiasscroccaro/Pesquisa_Hardware
At the root of this directory you will find some projects developed at my master degree at UNICAMP. Each one is classified from a project to another.

GiulianoAgostini04/FRED-Project
Real-time concentration monitoring system based on frontal-lobe EEG signals. Features a custom PCB designed with TinkerCAD and KiCad, OpenBCI Ganglion and Arduino UNO for signal acquisition, display, and frequency-band…




alberto-battistel/Teensy-EIS
Transform your teensy 3.6 (pjrc.com) into an instrument for electrochemical impedance spectroscopy.


shreenandansonu/Electronic-Stethescope
EKOBIT is an electronics stethoscope, a AFE signal board for a digital stethoscope.

TZeng0698/Portable-EEG-with-Modular-Pre-Filtering-for-BCI-Applications
A Low-cost EEG BCI implementation with modular filtering card and ADS1298. The repo contains the PCB files and a guide to design your own(in progress).
It measures 175.3 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the INA128U, LM324 and IRF9540NS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mathiasscroccaro/Pesquisa_Hardware repository on GitHub, at the commit this page was made from: the board is IVmeasurement/IVmeasurement_v0.1/IVmeasurement.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mathiasscroccaro before reusing the design.