

Eink NFC
This is PCB project of smart tag for master's degree diploma project
- Size
- 65 × 30 mm
- Copper layers
- 2
- Thickness
- 4.69 mm
- Parts
- 43
- Nets
- 65
- Pads
- 166
- Tracks, vias
- 447, 62
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Sep 2024
- Updated
- 14 Sep 2024
Overview
Eink NFC is an open-source printed circuit board by MateuszKozaczek, from the MateuszKozaczek/eink-NFC-PCB repository on GitHub. It is a 2-layer board of 65 × 30 mm with 43 parts on 65 nets, routed with 447 tracks and 62 vias.
It is built around the MIC5504-3.3YM5, MBR0530 and PTS636SM43LFS, with the STPS1L30A among its other parts. Its parts include 16 capacitors, 7 resistors, 3 diodes, 2 ICs and 2 connectors. It belongs with the radio and wireless and lEDs and displays boards and the STM32 boards of this library.
Main components
4MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky DiodesPTS636SM43LFS
插件,6x3.5mm-40℃~+90℃ 1.8N 12V 3.5mm 50mA 6mm IP40 No PC Pin Rectangular Button SPST-NO Through Hole 插件,6x3.5mm Tactile Switches ROHSC&KTactile SwitchesSTPS1L30A
SMA(DO-214AC)1 Independent 1A 200uA@30V 30V 395mV@1A 75A SMA(DO-214AC) Schottky Diodes ROHSSTMicroelectronicsSchottky Diodes
README
README.mdThis is PCB project of smart tag for master's degree diploma project
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 4.7uF/50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R5, R6 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C15 |
| 3 | MBR0530 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C16 |
| 1 | 3R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 50m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 510 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 68uH | Inductor_SMD:L_Bourns-SRN4018 | L1 |
| 1 | CONNECTOR_FFC_Eink_10051922-2410ELF | Switch_PFC_10051922-2410ELF:100519222410ELF | J3 |
| 1 | CR2032 socket | SMTU2032-LF:SMTU2032LF | BT1 |
| 1 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | HF(NFC) 13,56MHz | NFC:NFCANT_25X15 | ANT1 |
| 1 | I+ | TestPoint:TestPoint_Pad_D3.0mm | TP1 |
| 1 | I- | TestPoint:TestPoint_Pad_D3.0mm | TP2 |
| 1 | LOGO | silkscreen:weii_silkscreen | G*** |
| 1 | LOGO | nfc_silkscreen:nfc_silkscreen | G*** |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PTS636_SM43_LFS | SWITCH-PTS636_SM43_LFS:PTS636SM43LFS | S1 |
| 1 | SI138BDL | Package_TO_SOT_SMD:SOT-323_SC-70_Handsoldering | Q1 |
| 1 | ST25DV16K | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | RF1 |
| 1 | STM32L053C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | STPS1L30A | ul_STPS1L30A:SMA_STM | CR1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
Similar boards
- 4 layers100 × 100 mm

- 4 layers43 × 66 mm

- 2 layers129.5 × 72.6 mm

- 2 layers80 × 51.4 mm

P44ttngw
plan44/p44ttngw-hardware
KiCAD files for TTN LoRA gateway based on RAK831 and Omega2S
78 parts4 - 2 layers50 × 50 mm

Ro system
oxfordfish/STM32G0F6Px-ROC
A reverse osmosis controller system designed around STM32.
57 parts1CERN-OHL-P-2.0 - 2 layers102 × 84 mm

RelayCard
chapppy/Board-for-Relay-Card
Design of schematic and PCB for Relay Card control over USB and CAN based on STM32
81 partsGPL-3.0 - 2 layers63.3 × 63.1 mm

Nano drone
radioelf/nano_Drone_ESP32
Small drone with ESP32 to experiment with this https://github.com/rtlopez/esp-fc
59 parts - 2 layers33.5 × 39.7 mm

Questions
How big is the Eink NFC PCB?
It measures 65 × 30 mm and has 2 copper layers, 4.69 mm thick.
What parts does the Eink NFC use?
43 parts, built around the MIC5504-3.3YM5, MBR0530, PTS636SM43LFS and STPS1L30A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eink NFC KiCad files?
From the MateuszKozaczek/eink-NFC-PCB repository on GitHub, at the commit this page was made from: the board is eink-NFC.kicad_pcb and its schematic eink-NFC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eink NFC design in my own project?
Its repository states no licence, so its author keeps all rights: ask MateuszKozaczek before reusing the design.