2 layers96.6 × 82.8 mm
2 layers541.4 × 244.1 mm
Starby
mashmallaw/starbiesmall tamagotchi life creature that lives with you
- Size
- 541.4 × 244.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 27
- Pads
- 60
- Tracks, vias
- 47, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 12 Oct 2026
- Updated
- 12 Oct 2026
Overview
Starby is an open-source printed circuit board by mashmallaw, from the mashmallaw/starbie repository on GitHub. It is a 2-layer board of 541.4 × 244.1 mm with 13 parts on 27 nets, routed with 47 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdstarbie
small tamagotchi life creature that lives with you
Hi ! I'm alex and this is how i made my starby :
first i started with the schematic on kicad following the tutorial
then I put it though the pcb editor and routed it, adding small drawings and such
Finally, I made the firmware with Arduino, adding things such as a sparkle effect and a personalized sprite.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | LOGO | kitty.preety:star1 | G***, G*** |
| 2 | LOGO | kitty.preety:star2 | G***, G*** |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | kitty.preety:kittylogoreal | G*** |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C6-DIP | U2 |
Questions
How big is the Starby PCB?
It measures 541.4 × 244.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starby use?
13 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starby KiCad files?
From the mashmallaw/starbie repository on GitHub, at the commit this page was made from: the board is starby/starby.kicad_pcb and its schematic starby/starby.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starby design in my own project?
Its repository states no licence, so its author keeps all rights: ask mashmallaw before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5