
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

I created a PCB for a "keyboard" with 4 keys with kiCad
4-Keys is an open-source printed circuit board by MartinKoma, from the MartinKoma/4-Keys repository on GitHub. It is a 2-layer board of 73.6 × 42.3 mm with 26 parts on 42 nets, routed with 217 tracks and 22 vias.
It is built around the ATMEGA32U4. Its parts include 8 capacitors, 5 switches, 4 resistors, 4 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
I created a PCB for a "keyboard" with 4 keys with kiCad
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4, C5, C6 |
| 4 | D | keyboard_parts:D_SOD123_axial | D1, D2, D3, D4 |
| 4 | KEYSW | keebs:Mx_Alps_100 | K1, K2, K3, K4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7 |
| 1 | ATMEGA32U4 | ATmega32U4:ATmega32U4 | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_mini_micro_B | keyboard_parts:USB_miniB_hirose_5S8 | J1 |
| 1 | XTAL_GND | user:crystal_FA238-TSX3225 | X1 |
The 24 most common of 26 parts.

joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware



evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)



It measures 73.6 × 42.3 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MartinKoma/4-Keys repository on GitHub, at the commit this page was made from: the board is 4Keys.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MartinKoma before reusing the design.