Skip to the content
4 layers100 × 100 mmHackday13, the printed circuit board in 3D

This PCB is meant to write and read from PMOD pins and drive an LED matrix based on these pins. There will be a microcontroller that drives the LED matrix so it can also have an independent program to display arbitrary…

Size
100 × 100 mm
Copper layers
4
Thickness
1.67 mm
Parts
48
Nets
81
Pads
264
Tracks, vias
0, 0
Pours
1
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
15 Mar 2024
Updated
15 Apr 2026

Overview

Hackday13 is an open-source printed circuit board by marnovandermaas, from the marnovandermaas/LED_matrix_PCB repository on GitHub. It is a 4-layer board of 100 × 100 mm with 48 parts on 81 nets.

It is built around the 74HC165D and 74HC595. Its parts include 19 resistors, 7 diodes, 7 connectors, 5 ICs and 2 capacitors. It belongs with the lEDs and displays boards and the RP2040 boards of this library.

Main components

2

README

README.md

PCB for driving an LED matrix

This PCB is meant to write and read from PMOD pins and drive an LED matrix based on these pins. There will be a microcontroller that drives the LED matrix so it can also have an independent program to display arbitrary things on the matrix.

The PCB should be able to be powered externally as well as through a battery. The reason to want to use a battery is that it can then be used as a conference badge to display a name on.

The PCB should connect to the Tiny Tapeout demo board, and specifically with this factorizer design that uses the bidirectional pins solely for output.

pinout

Component Specs

Components should be through hole to ease soldering.

LED Multiplexing

Row-wise (one row at a time):

  • 5 resistors (one per column)
  • 5 LEDs max on one pin
    • 10 mA max per LED without transistor
  • 7 phase update

Column-wise (one column at a time):

  • 7 resistors (one per row)
  • 7 LEDs max on one pin
    • 7 mA max per LED without transistor
  • 5 phase update

Try using PIO to do the high-frequency stuff? PIO emulator.

Pins

12 GPIO for the LEDs.

7 GPIO for PMOD output to Tiny Tapeout.

5 GPIO pins for PMOD input from Tiny Tapeout. Connect some to UART pins.

2 GPIO (or 1 ADC pin) for DIP switches.

Connect RUN pin to a normally-open momentary switch to GND to get a Reset button.

PCB schematic and design

We'll probably use a cheap PCB manufacturer like: JLC. Previously I had also considerd PCB way.

Farnell

Shift registers

To make sure we can drive all the PMOD input and output, we were thinking it's a good idea to use a shift register to save GPIO pins on the Pico. One thing Elliot mentioned was it would be good to have one full PMOD directly connected to the GPIO so that UART still works.

8-bit parallel input to serial output: TI SN74HC165N, 8 inputs with 1 ouput and 2 control signals.

Serial input to 8-bit parallel output: TI SN74HC595N, 8 outputs with 1 input and 2 control signals.

Harry's tip: use 74-series logic to get good datasheets.

Parts

48
QtyValueFootprintReferences
8200 OhmResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R13, R18, R19
60Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR11, R12, R14, R15, R16, R17
4LEDLED_THT:LED_D3.0mmD2, D5, D6, D7
4TestPointTestPoint:TestPoint_Pad_D3.0mmTP1, TP2, TP3, TP4
31kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8, R9, R10
3Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4, J5, J7
3D_SchottkyDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D3, D4
24.7uCapacitor_THT:C_Disc_D7.0mm_W2.5mm_P5.00mmC1, C2
274HC165Package_DIP:DIP-16_W7.62mmU3, U4
11000 OhmResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR7
12kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6
174HC595Package_DIP:DIP-16_W7.62mmU5
1Battery_CellBattery:BatteryHolder_Keystone_3002_1x2032BT1
1Conn_01x02_PinConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ6
1LED dot matrix 12 pincustom_components_led_pcb:LED_dot_matrix_TA07-11SEKWALEDs1
1MCP73831-4-OTPackage_TO_SOT_SMD:SOT-23-5U1
1RaspberryPi_Pico_WModule_RaspberryPi_Pico:RaspberryPi_Pico_CommonU2
1Reset buttonButton_Switch_THT:SW_PUSH_6mmSW1
1SW_DIP_x02Button_Switch_THT:SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mmSW2
1TT-bidirectionalTinyTapeout:PinHeader_2x06_P2.54mm_PMODPeriph2BJ3
1TT-inputTinyTapeout:PinHeader_2x06_P2.54mm_PMODPeriph2BJ2
1TT-outputTinyTapeout:PinHeader_2x06_P2.54mm_PMODPeriph2BJ1

Similar boards

  • 2 layers245.1 × 160 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64x4-Home-Computer

    My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

    139 parts326
  • 2 layers171.5 × 106.7 mmSequencer, the printed circuit board in 3D

    Sequencer

    westlicht/performer-hardware

    PER|FORMER Eurorack Sequencer - Hardware Design Files

    435 parts110
  • 2 layers306.1 × 130.2 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-64-Home-Computer

    Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64

    132 parts94
  • 2 layers208.9 × 170.8 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-3

    Version 3 of my educational DIY TTL computer built around a UART serial interface - now with blinkenlights!

    207 parts54
  • 2 layers148.8 × 132.2 mmUsbflashprog, the printed circuit board in 3D

    Usbflashprog

    robsonsmartins/usbflashprog

    A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

    125 parts36
  • 4 layers120 × 100 mmBsc, the printed circuit board in 3D

    Bsc

    shining-man/bsc_hw

    Hardware battery safety controller (BSC)

    286 parts31MIT
  • 2 layers56 × 110 mmTrs pcb, the printed circuit board in 3D

    Trs pcb

    Windfisch/midikraken

    A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.

    125 parts28

Questions

How big is the Hackday13 PCB?

It measures 100 × 100 mm and has 4 copper layers, 1.67 mm thick.

What parts does the Hackday13 use?

48 parts, built around the 74HC165D and 74HC595. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hackday13 KiCad files?

From the marnovandermaas/LED_matrix_PCB repository on GitHub, at the commit this page was made from: the board is hackday13.kicad_pcb and its schematic hackday13.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hackday13 design in my own project?

Its repository states no licence, so its author keeps all rights: ask marnovandermaas before reusing the design.