Skip to the content
2 layers280.2 × 132.1 mmMidi mixer one, the printed circuit board in 3D

MIDI Mixer One is a mixer-style MIDI controller built around Teensy. Includes hardware designs, firmware and a web config tool.

Size
280.2 × 132.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
72
Nets
75
Pads
403
Tracks, vias
582, 24
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
4 Aug 2020
Updated
10 Jan 2024

Overview

Midi mixer one is an open-source printed circuit board by markwheeler, from the markwheeler/midi-mixer-one repository on GitHub. It is a 2-layer board of 280.2 × 132.1 mm with 72 parts on 75 nets, routed with 582 tracks and 24 vias.

It is built around the 74HCT4051D. Its parts include 12 switches, 6 capacitors and 6 ICs. It belongs with the audio and music boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

1

README

README.md

MIDI Mixer One

MIDI Mixer One is a mixer-style USB MIDI controller built around Teensy.

More info in the wiki

Discussion thread on llllllll

Licensed under CC BY-NC-SA 4.0 (non-commercial use only).

MIDI Mixer One photo

MIDI Mixer One build photo

MIDI Mixer One photo

Parts

72
QtyValueFootprintReferences
41R_POT_USPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV1, RV2, RV10, RV11, RV12, RV13, RV14, RV15, RV16, RV17, RV18, RV19, RV20, RV21, RV22, RV23 +25
12SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12
50.1uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mmC1, C2, C3, C4, C5
574HCT4051Package_DIP:DIP-16_W7.62mmU2, U3, U4, U5, U6
147uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC6
1Teensy-LCTeensy:Teensy30_31_32_LCU1

The 65 most common of 72 parts.

Similar boards

  • 2 layers167.8 × 200.6 mmRandom Jazz Generator, the printed circuit board in 3D

    Random Jazz Generator

    telec16/modular-synth

    Little side project, don't expect much updates.

    132 parts16
  • 2 layers235 × 96.5 mmBigFoot, the printed circuit board in 3D

    BigFoot

    pierre-girbon/BigFoot

    Midi footswitches controller

    43 parts12
  • 2 layers50 × 50 mmPlantbot core, the printed circuit board in 3D

    Plantbot core

    plantbot/core_pcb

    A WiFi powered environmental sensor board for your house plants & hydroponic systems

    55 parts9AGPL-3.0
  • 2 layers99.8 × 70.9 mmAnalog multiplexer-8x8, the printed circuit board in 3D

    Analog multiplexer-8x8

    ellisgl/analog-multiplexer-8x8

    8x8 Analog Multiplexer (MUX) using 74xx4051 DIP package.

    37 parts2BSD-3-Clause
  • 4 layers209.5 × 209.5 mmRing LSD, the printed circuit board in 3D

    Ring LSD

    omarrules100/ringSensor

    41 parts1
  • 2 layers93.5 × 52.6 mmPhotodiodeAmplification, the printed circuit board in 3D

    PhotodiodeAmplification

    ArnavKoshy/GM2-OptogeneticControl

    A repository holding information and resources about the GM2 project about optogenetic control in bioreactors for enzyme synthesis

    26 parts
  • 2 layers195 × 150 mmFSR PAD, the printed circuit board in 3D

    FSR PAD

    leecurrent04/INHA_FSR_sensor

    2024 인하 종설

    160 parts

Questions

How big is the Midi mixer one PCB?

It measures 280.2 × 132.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Midi mixer one use?

72 parts, built around the 74HCT4051D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Midi mixer one KiCad files?

From the markwheeler/midi-mixer-one repository on GitHub, at the commit this page was made from: the board is pcb/MIDI Mixer One.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Midi mixer one design in my own project?

Its repository states no licence, so its author keeps all rights: ask markwheeler before reusing the design.