4 layers160 × 120 mm
2 layers22 × 42 mm
PRODIGY ESP32
mark69163/prodigy- Size
- 22 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 60
- Pads
- 204
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 May 2024
- Updated
- 9 Mar 2025
Overview
PRODIGY ESP32 is an open-source printed circuit board by mark69163, from the mark69163/prodigy repository on GitHub. It is a 2-layer board of 22 × 42 mm with 22 parts on 60 nets.
It is built around the ESP32-S3-WROOM-1-N8, FT231XQ-R and TS3USB221AQRSERQ1. Its parts include 6 resistors, 4 capacitors, 3 ICs, 2 diodes and 2 transistors. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
FT231XQ-R
QFN-20-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-20-EP(4x4) USB Converters ROHSFTDIUSB Converters
TS3USB221AQRSERQ1
UQFN-10(1.5x2)-40℃~+125℃ 12ns 16Ω 2.3V~3.6V 250ps 2:1 30ns 6pF 900MHz Automotive UQFN-10(1.5x2) Analog Switches - Special Purpose ROHSTexas InstrumentsAnalog Switches - Special Purpose
README
README.md"# prodigy"
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | BC850 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1.5mm | FID1, FID2 |
| 2 | SD05_SOD323 | Diode_SMD:D_SOD-323 | D1, D2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | Bus_M.2_Socket_B | M.2-Templates:M.2-B-KEY | J1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | FT231XQ | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U3 |
| 1 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | TS3USB221AQRSERQ1 | Package_DFN_QFN:Texas_UQFN-10_1.5x2mm_P0.5mm | U2 |
Questions
How big is the PRODIGY ESP32 PCB?
It measures 22 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PRODIGY ESP32 use?
22 parts, built around the ESP32-S3-WROOM-1-N8, FT231XQ-R and TS3USB221AQRSERQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PRODIGY ESP32 KiCad files?
From the mark69163/prodigy repository on GitHub, at the commit this page was made from: the board is PRODIGY-ESP32/PRODIGY-ESP32/PRODIGY-ESP32.kicad_pcb and its schematic PRODIGY-ATMEGA2560/PRODIGY-ATMEGA2560.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PRODIGY ESP32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mark69163 before reusing the design.
More from mark69163/prodigy
3- 4 layers55 × 40 mm
- 4 layers55 × 40 mm
Similar boards
- 4 layers213.4 × 138.9 mm
Capstone Project Smart glasses for the visually impaired
heyitsarthur/Capstone-Project-Smart-glasses-for-the-visually-impaired
The system operates on a distributed architecture split between a head-mounted sensor array and a chest-mounted compute module. Main Computing Unit: Raspberry Pi Compute Module 4 (CM4) running on a custom PCB.
197 parts1 - 4 layers100 × 70 mm
- 2 layers20.1 × 19 mm
- 2 layers84 × 114 mm
- 4 layers38.8 × 84.1 mm
- 4 layers65 × 30 mm
- 4 layers94 × 50.8 mm
- 4 layers46.8 × 34.8 mm
SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT