

PRODIGY ATMEGA2560
- Size
- 55 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 177
- Pads
- 406
- Tracks, vias
- 1,199, 350
- Pours
- 387
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 May 2024
- Updated
- 9 Mar 2025
Overview
PRODIGY ATMEGA2560 is an open-source printed circuit board by mark69163, from the mark69163/prodigy repository on GitHub. It is a 4-layer board of 55 × 40 mm with 30 parts on 177 nets, routed with 1,199 tracks and 350 vias.
It is built around the FT231XQ-R and TXS0108EPW. Its parts include 10 capacitors, 4 resistors, 3 ICs, 2 transistors and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2FT231XQ-R
QFN-20-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-20-EP(4x4) USB Converters ROHSFTDIUSB ConvertersTXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
README
README.md"# prodigy"
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C8, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask3mm | FID1, FID2, FID3 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C9 |
| 2 | 4.7pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | BC850 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | DF40C-100DP-04V-51 | DF40C-100DP-0:DF40C100DP04V51 | J1, J2 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | ATmega2560-8A | Package_QFP:TQFP-100_14x14mm_P0.5mm | U1 |
| 1 | FT231XQ | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
More from mark69163/prodigy
3- 4 layers160 × 120 mm

- 4 layers55 × 40 mm

- 2 layers22 × 42 mm

Similar boards
- 4 layers65 × 30 mm

- 4 layers94 × 50.8 mm

- 4 layers46.8 × 34.8 mm

SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT - 6 layers13 × 9.4 mm

- 6 layers80 × 70 mm

IMX6 Demo Board from REF
ts-manuel/iMX6-Demo-Board
Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core
504 parts10GPL-3.0 - 4 layers89 × 57 mm

- 4 layers50 × 80 mm

ARGOS DEMO
CNES/argos-demo-board
Demo board designed to use the ARRIBADA SMD module via USB to send ARGOS messages to the Kineis constellation.
91 parts7CERN-OHL-S-2.0 - 2 layers101.5 × 53.3 mm

Questions
How big is the PRODIGY ATMEGA2560 PCB?
It measures 55 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PRODIGY ATMEGA2560 use?
30 parts, built around the FT231XQ-R and TXS0108EPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PRODIGY ATMEGA2560 KiCad files?
From the mark69163/prodigy repository on GitHub, at the commit this page was made from: the board is PRODIGY-ATMEGA2560/PRODIGY-ATMEGA2560.kicad_pcb and its schematic PRODIGY-ATMEGA2560/PRODIGY-ATMEGA2560.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PRODIGY ATMEGA2560 design in my own project?
Its repository states no licence, so its author keeps all rights: ask mark69163 before reusing the design.