2 layers107 × 54 mm
2 layers40.6 × 40.6 mm
Lab2 KiCad
Marcovm9/PCB-Design- Size
- 40.6 × 40.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 8
- Pads
- 31
- Tracks, vias
- 61, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Dec 2023
- Updated
- 25 Dec 2023
Overview
Lab2 KiCad is an open-source printed circuit board by Marcovm9, from the Marcovm9/PCB-Design repository on GitHub. It is a 2-layer board of 40.6 × 40.6 mm with 10 parts on 8 nets, routed with 61 tracks and 6 vias.
It is built around the NE555D. Its parts include 4 resistors, 2 capacitors, 2 diodes, 1 IC and 1 connector.
Main components
1README
README.mdGoal
The goal of this lab is to design an oscillator circuit based on a 555 timer, which is an integrated circuit (IC) chip used in a range of timer, delay, pulse generation, and oscillator applications.
Final Design
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | C_Polarized | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J1 |
| 1 | NE555D | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
Questions
How big is the Lab2 KiCad PCB?
It measures 40.6 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lab2 KiCad use?
10 parts, built around the NE555D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lab2 KiCad KiCad files?
From the Marcovm9/PCB-Design repository on GitHub, at the commit this page was made from: the board is marco PCB Design/PCB_Design/lab2_KiCad/lab2 KiCad.kicad_pcb and its schematic marco PCB Design/PCB_Design/lab2_KiCad/lab2 KiCad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lab2 KiCad design in my own project?
Its repository states no licence, so its author keeps all rights: ask Marcovm9 before reusing the design.
Similar boards
- 2 layers140.7 × 47.4 mm
EG8010 A1
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
201 parts17MIT - 2 layers175 × 115 mm
Laser Controllerv2 only for pcb test
Andre1Becker/GalvOS
Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors
122 parts11GPL-3.0 - 4 layers189.4 × 59.1 mm
- 2 layers95 × 60 mm
- 2 layers39 × 66.5 mm
- 6 layers210 × 119 mm
Claculator Keypad
Robert-Mones/Claculator
A reverse Polish notation calculator with added features such as comparisons, branching, and custom recursive operators taken from the Clac project from the 15-122 course at Carnegie Mellon University.
202 parts5 - 2 layers155 × 30 mm
