

Piso 12
- Size
- 70 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 40
- Pads
- 94
- Tracks, vias
- 208, 26
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Mar 2023
- Updated
- 10 Dec 2024
Overview
Piso 12 is an open-source printed circuit board by Marcos-199-GitHub, from the Marcos-199-GitHub/Cansat repository on GitHub. It is a 2-layer board of 70 × 56 mm with 22 parts on 40 nets, routed with 208 tracks and 26 vias.
It is built around the ATMEGA328P-PU and BMP280. Its parts include 10 connectors, 6 resistors, 3 ICs, 2 capacitors and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure Sensors
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 2 | 47p | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U4 |
| 1 | BAT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | BMM_DAT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | BMM_PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | BMP280 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Crystal | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | EXT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | GPS | Library:GPS Neo-6M | J7 |
| 1 | Input | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J10 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MPU6050 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Output | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J5 |
| 1 | SHT30 | Library:SHT30 | J8 |
| 1 | ~ | Library:BMM150 | U3 |
More from Marcos-199-GitHub/Cansat
2- 2 layers70 × 56 mm

- 2 layers65 × 30 mm

Similar boards
- 4 layers55 × 55 mm

RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
90 parts339 - 2 layers168.9 × 123.3 mm

OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware
296 parts161CC0-1.0 - 2 layers37.8 × 21.5 mm

- 8 layers34 × 34 mm

OpenDrone AIO FC F405 HW
phonght32/OpenDrone_HW_AIO_FC_F405
OpenDrone Project - AIO Brushless FC F405.
211 parts53MIT - 2 layers47.6 × 69.1 mm

Pico Drone
TheNoobInventor/pi-pico-drone
A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.
33 parts29Apache-2.0 - 2 layers55 × 90.8 mm

- 4 layers100 × 54 mm

- 2 layers115 × 115 mm

Questions
How big is the Piso 12 PCB?
It measures 70 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Piso 12 use?
22 parts, built around the ATMEGA328P-PU and BMP280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Piso 12 KiCad files?
From the Marcos-199-GitHub/Cansat repository on GitHub, at the commit this page was made from: the board is Assets/PCBS/Kicad/Piso 1 2/Piso_12/Piso_12.kicad_pcb and its schematic Assets/PCBS/Kicad/BMP280/Adafruit BMP280 STEMMA QT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Piso 12 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Marcos-199-GitHub before reusing the design.