

Midi splitter trs
Yet another cheap MIDI Splitter x6
- Size
- 96 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 62
- Pads
- 152
- Tracks, vias
- 156, 37
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Feb 2019
- Updated
- 12 Feb 2024
Overview
Midi splitter trs is an open-source printed circuit board by mar0x, from the mar0x/midi_splitter repository on GitHub. It is a 2-layer board of 96 × 50 mm with 43 parts on 62 nets, routed with 156 tracks and 37 vias.
It is built around the MM74HC540MTCX, BAS316,115-JSM and DS1099-WN0, with the MF-MSMF050-2 among its other parts. Its parts include 17 resistors, 9 connectors, 4 diodes, 2 capacitors and 2 ICs. It belongs with the audio and music boards of this library.
Main components
4MM74HC540MTCX
TSSOP-20-40℃~+85℃ 1 12ns@4.5V,50pF 2V~6V 7.8mA 7.8mA 74HC 8 80uA Tri-State TSSOP-20 Buffers, Drivers, Receivers, Transceivers ROHSonsemiBuffers, Drivers, Receivers, TransceiversBAS316,115-JSM
SOD-3231 Independent 1.25V@150mA 150mA 200mW 50uA@75V 75V SOD-323 Switching Diodes ROHSJSMSEMISwitching DiodesDS1099-WN0
弯插-40℃~+85℃ 1 1.8A 16.3mm 4P Female Right Angle Type-B USB 2.0 White Push-Pull USB Connectors ROHSCONNFLY ElecUSB ConnectorsMF-MSMF050-2
1812-40℃~+85℃ 100A 150mΩ 15V 1A 1Ω 3.2mm 5.4mm 500mA 1812 Resettable Fuses ROHSBournsResettable Fuses
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R6, R7, R8, R9, R10, R11, R12, R13 |
| 4 | AudioJack3_SwitchTR | Connector_Audio:Jack_3.5mm_CUI_SJ1-3535NG_Horizontal | J4, J5, J6, J9 |
| 4 | DIN-5_180degree | lib:DIN5MIDI-OOTDTY | J1, J2, J3, J4 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_ISO14580 | H1, H2, H3, H4 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14, R16 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R23 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 1N914 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 6N138 | Package_DIP:DIP-8_W8.89mm_SMDSocket_LongPads | U1 |
| 1 | BAS316.115 | Diode_SMD:D_SOD-323_HandSoldering | D2 |
| 1 | DS1099 | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J8 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z10.0mm | D3 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z6.0mm | D4 |
| 1 | LOGO | lib:x6 | G*** |
| 1 | MF-MSMF050-2 | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | MM74HC540MTCX | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
The 40 most common of 43 parts.
More from mar0x/midi_splitter
1- 2 layers25 × 27 mm

Similar boards
- 4 layers60 × 110 mm

- 4 layers69.9 × 26.3 mm

- 2 layers100 × 100 mm

CTRL
DD1SB/ARDF-TX
Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.
256 partsMIT - 2 layers62.1 × 25.8 mm

Espnow sonda
dudeku/esp-now-differential-probe
OR in Ethernet.h in line 261: virtual void begin(); -> virtual void begin(uint16t port=0);
62 parts - 2 layers45.7 × 71.1 mm

- 2 layers50 × 90 mm

- 2 layers13.7 × 21.4 mm

- 2 layers120 × 80 mm

Spikeling v3.2
OpenSourceNeuro/Spikeling
A hardware implementation of spiking neurons for neuroscience teaching and outreach
233 parts21GPL-3.0
Questions
How big is the Midi splitter trs PCB?
It measures 96 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Midi splitter trs use?
43 parts, built around the MM74HC540MTCX, BAS316,115-JSM, DS1099-WN0 and MF-MSMF050-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Midi splitter trs KiCad files?
From the mar0x/midi_splitter repository on GitHub, at the commit this page was made from: the board is kicad/midi_splitter_trs/midi_splitter_trs.kicad_pcb and its schematic kicad/midi_splitter/midi_splitter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Midi splitter trs design in my own project?
Its repository states no licence, so its author keeps all rights: ask mar0x before reusing the design.