Skip to the content
4 layers70.6 × 75 mmSmart irrigator, the printed circuit board in 3D

An ESP32 based smart irrigator system that uses a LoRaWAN node to output on LoRa and an ESP32 and solenoid to automatically irrigate when needed.

Size
70.6 × 75 mm
Copper layers
4
Thickness
1.6 mm
Parts
33
Nets
72
Pads
197
Tracks, vias
312, 61
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
27 Jun 2026
Updated
27 Jun 2026

Overview

Smart irrigator is an open-source printed circuit board by mantisea12, from the mantisea12/esp32_smart_irrigator repository on GitHub. It is a 4-layer board of 70.6 × 75 mm with 33 parts on 72 nets, routed with 312 tracks and 61 vias.

It is built around the ESP32-S3-WROOM-1-N8, SN74LV1T34DCK and TSR 1-24150, with the AMS1117-3.3, USBLC6-2SC6 and SS14 among its other parts. Its parts include 10 capacitors, 6 ICs, 5 connectors, 4 resistors and 4 diodes. It belongs with the radio and wireless boards and the ESP32 boards of this library.

Main components

7

README

README.md

ESP32 Smart Irrigator

A 4-layer LoRaWAN-enabled irrigation controller designed for remote monitoring and automated irrigation applications.

Features

  • ESP32 microcontroller
  • LoRaWAN connectivity
  • Automated irrigation control
  • Sensor interfaces
  • Power management circuitry
  • Multi-layer PCB design

Design Information

  • PCB Layers: 4
  • Software: KiCad
  • MCU: ESP32

Repository Contents

  • KiCad project files
  • Manufacturing Gerbers
  • BOM
  • Board renders

Notes

This project was designed to explore multi-layer PCB routing, RF integration, and embedded control systems.

Parts

33
QtyValueFootprintReferences
7100nCapacitor_SMD:C_0603_1608MetricC1-5V1, C3, C3, C4, C6, C7, C8
310kResistor_SMD:R_0603_1608MetricR1, R2, R4
2Conn_01x02_PinConnector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_VerticalJ2, J5
2SS14Diode_SMD:D_SMAD3, D4
110uCapacitor_SMD:CP_Elec_3x5.3C1
110uCapacitor_SMD:C_0603_1608MetricC5
11N4007Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
11kResistor_SMD:R_0603_1608MetricR3
122uCapacitor_SMD:CP_Elec_4x4.5C2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1AntennaConnector_Coaxial:SMA_Amphenol_132289_EdgeMountAE1
1Conn_01x03_PinConnector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_VerticalJ1
1Conn_01x04_PinConnector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_VerticalJ3
1ESP32-S3-WROOM-1RF_Module:ESP32-S3-WROOM-1U1
1Fujitsu_FTR-LYAA005xRelay_THT:Relay_SPST-NO_Fujitsu_FTR-LYAA005x_FormA_VerticalK1
1MF-MSMF200/16XFuse:Fuse_1210_3225MetricF1
1MMBT2222APackage_TO_SOT_THT:TO-39-3Q1
1RAK811-LF-EU433RF_Module:RAK811U5
1SN74LV1T34DCKPackage_TO_SOT_SMD:SOT-353_SC-70-5U4
1TSR_1-24150Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THTU3
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U6
1USB_AConnector_USB:USB3_A_Molex_48406-0001_Horizontal_StackedJ4

Similar boards

  • 2 layers129.6 × 89.8 mmPowerMeter REV36, the printed circuit board in 3D

    PowerMeter REV36

    dj1yr/LJ-RF-Powermeter-Teensy-4.1

    Here is a collection of files for the RF Powermeter with Teensy 4.0/4.1. Since I could not find any source files for the PCB, I designed two boards based on Robert Entwistle (WA2T) and the really impressive software by…

    75 parts
  • 2 layers85 × 67 mmGaggimate, the printed circuit board in 3D

    Gaggimate

    dulerabbit/GaggiBre-legacy

    This is GaggiBre! a fork of Gaggimate with Manual Brew Control and Adaptive Mode. Made by Dule Rabbit

    113 parts8
  • 2 layers100 × 76.2 mmSomething Rework, the printed circuit board in 3D

    Something Rework

    PriX-Y/Fan-Hub

    RP2040 Fan hub for x4 pwm hub

    39 parts
  • 2 layers63.5 × 81.3 mmVAP thermal control, the printed circuit board in 3D

    VAP thermal control

    Purdue-AM/jeff_board

    A straightforward Arduino Nano breakout board that allows for driving 2 PWM lines up to 30V, powered on 12/24V, and connects to two thermal sensors.

    32 partsMIT
  • 4 layers340.8 × 104.6 mmNiphar, the printed circuit board in 3D

    Niphar

    mornepousse/Niphargus

    Niphargus — a slim, indestructible wireless split keyboard. ESP32 + nRF24, wired fallback, and an emergency kit hidden behind the USB port. The successor to the Rouge-Gorge.

    287 parts4MIT
  • 4 layers65 × 40.1 mmAero Zero, the printed circuit board in 3D

    Aero Zero

    ChladpavPy/Aero-Zero

    I started this project, because I wanted to build fully autonomous ai drone. When I looked at the flight controllers available on the market, they were full of hardware that I just do not need or just that I could not…

    97 parts
  • 4 layers100 × 50 mmPsu ext, the printed circuit board in 3D

    Psu ext

    PSU-Ext-Org/psu-ext-hardware

    A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.

    137 parts9CERN-OHL-S-2.0
  • 2 layersSmartRV AIO SMD, the printed circuit board in 3D

    SmartRV AIO SMD

    RoBro92/SmartRV-AIO

    An all in one RV/Campervan automation board.

    56 parts4AGPL-3.0

Questions

How big is the Smart irrigator PCB?

It measures 70.6 × 75 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Smart irrigator use?

33 parts, built around the ESP32-S3-WROOM-1-N8, SN74LV1T34DCK, TSR 1-24150 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Smart irrigator KiCad files?

From the mantisea12/esp32_smart_irrigator repository on GitHub, at the commit this page was made from: the board is smart_irrigator.kicad_pcb and its schematic smart_irrigator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Smart irrigator design in my own project?

Its repository states no licence, so its author keeps all rights: ask mantisea12 before reusing the design.