PriX-Y/Fan-HubRP2040 Fan hub for x4 pwm hub
Something Rework is an open-source printed circuit board by PriX-Y, from the PriX-Y/Fan-Hub repository on GitHub. It is a 2-layer board of 100 × 76.2 mm with 39 parts on 44 nets, routed with 468 tracks and 33 vias.
It is built around the TSR 1-24150 and ADP1108AN-12. Its parts include 9 capacitors, 9 resistors, 6 diodes, 4 ICs and 4 switches. It belongs with the RP2040 boards of this library.
RP2040 PWM Fan Controller for x4 fan
i made becuse this summer in europa is so hot: 43c but i didt have fan what have enough control for me so i made that, becuse my so bad soldring skill i make this full THT
Kicad - 10.1
Autodesk Fusion
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7, R8, R9 |
| 4 | 1N4148 | PCM_Diode_THT_AKL:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D4, D5 |
| 4 | Fan_4pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | M1, M2, M3, M4 |
| 4 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Bourns_Horizontal_PEC12R-2x17F-Sxxxx | SW5, SW6, SW7, SW8 |
| 3 | 0.1nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C6, C9 |
| 3 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | 10nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C7 |
| 3 | 1nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2, C5, C8 |
| 2 | 1N5818 | PCM_Diode_THT_AKL:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D6 |
| 1 | 100uH | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 | L1 |
| 1 | ADP1108AN-12 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J1 |
| 1 | ER_OLEDM0.91_1x-I2C | Display:ER_OLEDM0.91_1x-I2C | U3 |
| 1 | LM35-LP | Package_TO_SOT_THT:TO-92_Inline | U4 |
| 1 | Raspberry_Pi_Pico_THT | PCM_SL_Development_Boards:raspberry_pi_pico_THT | A1 |
| 1 | TSR_1-24150 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U2 |
dj1yr/LJ-RF-Powermeter-Teensy-4.1
Here is a collection of files for the RF Powermeter with Teensy 4.0/4.1. Since I could not find any source files for the PCB, I designed two boards based on Robert Entwistle (WA2T) and the really impressive software by…
mantisea12/esp32_smart_irrigator
An ESP32 based smart irrigator system that uses a LoRaWAN node to output on LoRa and an ESP32 and solenoid to automatically irrigate when needed.
Purdue-AM/jeff_board
A straightforward Arduino Nano breakout board that allows for driving 2 PWM lines up to 30V, powered on 12/24V, and connects to two thermal sensors.
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040
windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器
It measures 100 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the TSR 1-24150 and ADP1108AN-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the PriX-Y/Fan-Hub repository on GitHub, at the commit this page was made from: the board is Kicad - Fan Hub - Something/Something-Rework.kicad_pcb and its schematic Kicad - Fan Hub - Something/Something.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask PriX-Y before reusing the design.