
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Galvanometer Controller, DAC and Audio In
GalvoDriver is an open-source printed circuit board by ManiacalLabs, from the ManiacalLabs/GalvoDriver repository on GitHub. It is a 4-layer board of 56.5 × 61.7 mm with 33 parts on 37 nets, routed with 141 tracks and 6 vias.
It is built around the 74AHC125D, TL082 and MCP4822-E/P, with the PN2222A among its other parts. Its parts include 11 resistors, 8 connectors, 4 ICs, 2 capacitors and 1 transistor. It belongs with the audio and music boards of this library.
Galvanometer Controller, DAC and Audio In
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R5, R7 |
| 2 | .1uF | Capacitors_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 2 | 10K_TRIM_GAIN | Potentiometers:Potentiometer_Trimmer_Bourns_3296W | RV1, RV3 |
| 2 | 10K_TRIM_OFFSET | Potentiometers:Potentiometer_Trimmer_Bourns_3296W | RV2, RV4 |
| 2 | 1K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R6 |
| 2 | 330 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 2 | 47K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R8 |
| 2 | Conn_01x03 | Connectors_JST:JST_XH_B03B-XH-A_03x2.50mm_Straight | J2, J7 |
| 2 | TL082 | Housings_DIP:DIP-8_W7.62mm_Socket | U1, U3 |
| 1 | 100 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 74AHC125 | Housings_DIP:DIP-14_W7.62mm_Socket | U4 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J6 |
| 1 | Conn_01x06_Male | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J3 |
| 1 | JUMPER_A | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
| 1 | JUMPER_B | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | LOGO | LOGOS:logo_MLlabs_small | G*** |
| 1 | MCP4822 | Housings_DIP:DIP-8_W7.62mm_Socket | U2 |
| 1 | PN2222A | TO_SOT_Packages_THT:TO-92_Inline_Wide | Q1 |
| 1 | Screw_Terminal_01x03 | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_MKDS1.5-3pol | J1 |
| 1 | Screw_Terminal_01x04 | TerminalBlocks_Phoenix:TerminalBlock_Phoenix_MKDS1.5-4pol | J8 |
The 31 most common of 33 parts.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

MiguelDeTrool/tarbleming
Arduino Nano based random looping sequencer Eurorack module

phuid/laser_projector
this script installs all the dependencies of my programs and sets up the RaspberryPi to start all the programs on boot using pm2.

wezelball/crt_esp
A hardware and software build of a CRT controlled by an ESP32

FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck

d8ahazard/glimmr
Glimmr is a .Net Core application to synchronize Ambient LED strips with Hue Lights, Lifx Bulbs, and Nanoleaf Panels

adrienkohlbecker/BB816
A homebrew 16 bit breadboard computer based on WDC's 65C816 processor

It measures 56.5 × 61.7 mm and has 4 copper layers, 1.6 mm thick.
33 parts, built around the 74AHC125D, TL082, MCP4822-E/P and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ManiacalLabs/GalvoDriver repository on GitHub, at the commit this page was made from: the board is PCB/GalvoDriver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ManiacalLabs before reusing the design.