ManiacalLabs/AllPixel56Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
AllPixel is an open-source printed circuit board by ManiacalLabs, from the ManiacalLabs/AllPixel repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.5 × 24.5 mm with 28 parts on 21 nets, routed with 193 tracks and 13 vias.
Its parts include 8 resistors, 5 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Firmware and Board Designs for the AllPixel LED Controller Board
Be sure to check out the AllPixel Quick Start Guide
The AllPixel is fully supported by the BiblioPixel Python library
Check out our site for more details AllPixel at Maniacal Labs
The AllPixel makes use of our ATUSB Arduino Core
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1K | ML_c_0805 | R1, R5, R8 |
| 2 | 1uF | ML_c_1206 | C3, C4 |
| 2 | 22 | ML_c_0805 | R3, R4 |
| 2 | 22pF | ML_SparkFun-0603-CAP | C1, C2 |
| 2 | OPT | ML_R1-8W | R6, R7 |
| 2 | SOLDERJUMPERNO | SparkFun-SJ_2S-NO | SJ2, SJ3 |
| 1 | 10k | ML_c_0805 | R2 |
| 1 | 16MHz | ML_SparkFun-HC49UP | Y1 |
| 1 | 500mA | ML_c_1206 | F1 |
| 1 | ATMEGA16U4/32U4 | TQFP44_FixedSilk | U1 |
| 1 | BARREL_JACK | ML_BARREL_JACK_ROUND_PADS_SHORT | CON2 |
| 1 | CP1 | CP_10x12.5mm | C5 |
| 1 | DIODE | ML_Diode_largerholes | D2 |
| 1 | ICSP | ML_SparkFun-2X3_LOCK | JP1 |
| 1 | LED | ML_LED-1206 | D1 |
| 1 | ML_USB_MINI | ML_USB_MINI_posts | CON1 |
| 1 | NPN | SOT23EBC | Q1 |
| 1 | OSHW-logo_silkscreen-front_3mm | OSHW-logo_silkscreen-front_3mm | G*** |
| 1 | OUTPUT | ML_SparkFun-1X04_LOCK_SCREW | JP2 |
| 1 | RESET | ML_Tactile-SMT | S1 |
| 1 | Val** | ML_LOGO | Ref** |
It measures 68.5 × 24.5 mm and has 2 copper layers, 1.6 mm thick.
28 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ManiacalLabs/AllPixel repository on GitHub, at the commit this page was made from: the board is PCB/AllPixel/AllPixel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk