AllPixel
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
PowerTap is an open-source printed circuit board by ManiacalLabs, from the ManiacalLabs/AllPixel repository on GitHub, published under the MIT licence. It is a 2-layer board of 23 × 23 mm with 4 parts on 4 nets, routed with 6 tracks and 0 vias.
Its parts include 1 capacitor and 1 connector.
Firmware and Board Designs for the AllPixel LED Controller Board
Be sure to check out the AllPixel Quick Start Guide
The AllPixel is fully supported by the BiblioPixel Python library
Check out our site for more details AllPixel at Maniacal Labs
The AllPixel makes use of our ATUSB Arduino Core
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | BARREL_JACK | ML_BARREL_JACK_ROUND_PADS_SHORT | CON1 |
| 1 | CP1 | ML_CAP_DOUBLESIDED | C1 |
| 1 | INPUT | ML_SparkFun-1X04_LOCK_SCREW | JP1 |
| 1 | OUTPUT | ML_SparkFun-1X04_LOCK_SCREW | JP2 |
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.

joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2
It measures 23 × 23 mm and has 2 copper layers, 1.6 mm thick.
4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ManiacalLabs/AllPixel repository on GitHub, at the commit this page was made from: the board is PCB/AllPixel/PowerTap.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).