ManiacalLabs/AllPixel56Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
APmini is an open-source printed circuit board by ManiacalLabs, from the ManiacalLabs/AllPixel repository on GitHub, published under the MIT licence. It is a 4-layer board of 40 × 30.3 mm with 25 parts on 43 nets, routed with 217 tracks and 29 vias.
Its parts include 8 resistors, 6 capacitors, 4 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Firmware and Board Designs for the AllPixel LED Controller Board
Be sure to check out the AllPixel Quick Start Guide
The AllPixel is fully supported by the BiblioPixel Python library
Check out our site for more details AllPixel at Maniacal Labs
The AllPixel makes use of our ATUSB Arduino Core
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | APM_0603R_dist_m635:0603R_dist_m635 | R1, R5, R8 |
| 2 | 1uF | Capacitors_SMD:C_0603 | C3, C4 |
| 2 | 22 | APM_0603R_dist_m635:0603R_dist_m635 | R3, R4 |
| 2 | 22pF | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | 330 | APM_0603R_dist_m635:0603R_dist_m635 | R6, R7 |
| 2 | 470uF | Capacitors_SMD:c_elec_10x10 | C5, C6 |
| 1 | 10k | APM_0603R_dist_m635:0603R_dist_m635 | R2 |
| 1 | 250mA | Capacitors_SMD:C_1206 | F1 |
| 1 | ATMEGA16U4/32U4 | Housings_QFP:TQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | AVR-ISP-6 | ML_ICSP_PADS:ML_ICSP_PADS | CON3 |
| 1 | BARREL_JACK_VSTRIP | APM_BarrelJack:ML_BARREL_JACK_ROUND_PADS_SHORT | CON2 |
| 1 | CRYSTAL_ABM3B_3.2mm_5mm | APM_CrystalSMD:Crystal_ABM3B_3.2mm_5mm | Y1 |
| 1 | DIODES_B140_SMA | MF_Discrete_Semiconductor:MF_Discrete_Semiconductor-SMA | D2 |
| 1 | LED_OUTPUT | Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_4pol | P2 |
| 1 | ML_USB_MINI | MF_Connectors:MF_Connectors-MICROUSB-RIGHT | CON1 |
| 1 | Maniacal Labs | LOGOS:logo_MLlabs | L103 |
| 1 | NPN_BJT_SOT-23-3 | MF_Discrete_Semiconductor:MF_Discrete_Semiconductor-SOT-23-3 | U2 |
| 1 | PWRGOOD | LEDs:LED_0603 | D1 |
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
ManiacalLabs/AllPixel
Firmware and Board Designs for the AllPixel LED Controller Board: Please direct questions and support requests to https://forum.maniacallabs.com/c/hardware - The Issues list here should be reserved for actual bugs.
menloresearch/asimov-1
v1 of Asimov, an open-source humanoid robot
opentac/opentac
OpenTac: open tools to design, fabricate, read and simulate flex-PCB tactile skins that sense normal and shear force, for any robot surface.
kounocom/Mumo
A compact 13×18mm IMU module featuring the TDK InvenSense ICM-45686 6-axis IMU with integrated 32.768kHz clock and QST QMC6309H 3-axis magnetometer.
JeremyJStarcher/Goldfish-clone-JLCPCB
Arduino Pro Micro / GoldFish compatible AtMega32U4 for JLCPCB assembly
It measures 40 × 30.3 mm and has 4 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ManiacalLabs/AllPixel repository on GitHub, at the commit this page was made from: the board is PCB/AllPixelMini/PCB/APmini.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).