2 layers96.6 × 82.8 mm
2 layers177.8 × 86.4 mm
Pico gardico
MandoRick/SandBox1my Sandbox
- Size
- 177.8 × 86.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 60
- Pads
- 209
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 21 Jul 2021
- Updated
- 12 Jul 2024
Overview
Pico gardico is an open-source printed circuit board by MandoRick, from the MandoRick/SandBox repository on GitHub. It is a 2-layer board of 177.8 × 86.4 mm with 62 parts on 60 nets.
It is built around the DHT11. Its parts include 26 resistors, 15 connectors, 7 fuses and 2 diodes. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdSandBox
my Sandbox
this is a place where i keep my garbage code so please ignore it
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 33R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 10 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3, R4, R24, R25, R30, R31, R32, R33, R34, R35 |
| 7 | Fuse | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1, F2, F3, F4, F5, F6, F7 |
| 6 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | DOWN, LEFT, MENU, RIGHT, SELECT, UP |
| 2 | PICO | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1, J2 |
| 2 | Soil Moisture | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J73, J93 |
| 1 | 12V10A | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | P0 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R18 |
| 1 | BuckIN | Converter_DCDC:Converter_DCDC_Bothhand_CFUDxxxx_THT | J14 |
| 1 | DHT11 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J83 |
| 1 | D_Schottky | Diode_THT:D_5KPW_P7.62mm_Vertical_AnodeUp | D2 |
| 1 | Display | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J103 |
| 1 | Fan | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J51 |
| 1 | Fan2 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J61 |
| 1 | Light | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J31 |
| 1 | Light2 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J41 |
| 1 | PWR_LED | LED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z1.6mm | D1 |
| 1 | Pump | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J11 |
| 1 | Pump2 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J21 |
| 1 | RTC | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J4 |
The 56 most common of 62 parts.
Questions
How big is the Pico gardico PCB?
It measures 177.8 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pico gardico use?
62 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pico gardico KiCad files?
From the MandoRick/SandBox repository on GitHub, at the commit this page was made from: the board is Pico_gardico/Pico_gardico.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pico gardico design in my own project?
Its repository states no licence, so its author keeps all rights: ask MandoRick before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5