

Controller
- Size
- 100 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 67
- Pads
- 263
- Tracks, vias
- 591, 61
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Mar 2020
- Updated
- 26 Apr 2024
Overview
Controller is an open-source printed circuit board by mamaheux, from the mamaheux/bass-amplifier repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 50 mm with 58 parts on 67 nets, routed with 591 tracks and 61 vias.
It is built around the MAX3232ID, MCP3208-BI/P and 74HC14, with the TD9944TG-G among its other parts. Its parts include 27 capacitors, 5 resistors, 4 ICs, 4 transistors and 3 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
4MAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsMCP3208-BI/P
PDIP-16-40℃~+85℃ 0.5LSB 100kHz 12 1LSB 1MHz、2MHz 2.7V~5.5V 500nA 8 External External Multiplexers、Bipolar input Not supported SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInvertersTD9944TG-G
SOIC-8-55℃~+150℃ 125pF 1A 2 N-Channel 240V 25pF 2V 6Ω@10V SOIC-8 MOSFETs ROHSMicrochip TechnologyMOSFETs
README
README.mdBass-Amplifier
Bass-Amplifier is a project to create our own bass guitar amplifier. The amplifier features are:
- Digital sound processing
- Footswitch
- Tuner output
- XLR and jack direct output
- Effect send and return
- Contour and presence filters
- 4-band EQ
- Compressor effect
- Overdrive effect
- Octaver effect
- Delay effect
- Reverb effect
Folder Descriptions
cases
This folder contains the CAD files to create the cases.

code
This folder contains the MCU source code for the footswitch, the bass amplifier signal processor and the bass amplifier controller.
electronics
This folder contains the schematics and PCB layouts of the bass amplifier.
tools/signal_processing
This folder contains a Python tool to test the audio effects.

Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 1µF/16V | Capacitor_SMD:C_0805_2012Metric | C6, C7, C10, C11, C12, C13, C14, C16, C17, C18, C19, C20, C21, C22 |
| 7 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7 |
| 5 | 0.1µF | Capacitor_SMD:C_0805_2012Metric | C23, C24, C25, C26, C27 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5 |
| 4 | TD9944 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2, Q3, Q4 |
| 2 | 0.1µF/25V | Capacitor_SMD:C_0805_2012Metric | C8, C15 |
| 2 | 1000µF/25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | 1µF/10V/UL ESR | Capacitor_SMD:C_0805_2012Metric | C5, C9 |
| 2 | 2.2µF/25V/UL low ESR | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | LED | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | D1, D2 |
| 1 | 10k | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TH1 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | MAX3232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | MCP3208 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | SW_SPST_X3 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SW1 |
| 1 | Teensy_LC | bass_amplifier:Teensy_LC | U1 |
| 1 | footswitch | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
The 54 most common of 58 parts.
More from mamaheux/bass-amplifier
3- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 2 layers100 × 50 mm

Similar boards
- 2 layers99.5 × 99.5 mm

ESP32 master
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
155 parts3MIT - 4 layers100 × 100 mm

ESP32-Eurorack Audio
ctag-fh-kiel/esp32-eurorack-audio
Open source eurorack audio module based on ESP32
173 parts71 - 2 layers150.5 × 127 mm

Eurorack engine
sinneb/esp32-hvcc
Heavy compiler (hvcc) sources running on ESP32-DevKitC powered eurorack module
81 parts29 - 2 layers100 × 100 mm

- 2 layers222.3 × 80 mm

Theremin lcd controls board
fpga-theremin/theremin
Open source digital FPGA based theremin project
88 parts11 - 4 layers100 × 100 mm

- 2 layers130 × 80 mm

Pico controller
cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source
125 parts8GPL-3.0 - 2 layers183 × 128.7 mm

Questions
How big is the Controller PCB?
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
58 parts, built around the MAX3232ID, MCP3208-BI/P, 74HC14 and TD9944TG-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the mamaheux/bass-amplifier repository on GitHub, at the commit this page was made from: the board is electronics/control/controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).