2 layers59 × 61.5 mm
Breakout
makinbacon21/mipi-mapper
KiCAD board design adapting between a BM23PF0.8-40DP-0.35V for an OLED microdisplay and a 31-pin DSI ribbon connector. WIP.
2 parts
2 layers36.2 × 22.9 mm
E90-dsi split
makinbacon21/mipi-mapperKiCAD board design adapting between a BM23PF0.8-40DP-0.35V for an OLED microdisplay and a 31-pin DSI ribbon connector. WIP.
- Size
- 36.2 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 64
- Pads
- 187
- Tracks, vias
- 450, 46
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Dec 2024
- Updated
- 30 Apr 2025
Overview
E90-dsi split is an open-source printed circuit board by makinbacon21, from the makinbacon21/mipi-mapper repository on GitHub. It is a 2-layer board of 36.2 × 22.9 mm with 31 parts on 64 nets, routed with 450 tracks and 46 vias.
It is built around the ICM-42605 and F0504-H-06-10G-R. Its parts include 14 capacitors, 2 resistors, 2 ICs, 2 diodes and 2 connectors.
Main components
2
ICM-42605
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 7.5uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometers
F0504-H-06-10G-R
SMD,P=0.5mm,卧贴-25℃~+85℃ 0.3mm 0.5mm 1mm 500mA 50V 6P Double-Sided Contacts, Top and Bottom Entry Gold Hinged Lid Phosphor bronze Surface Mount, Right Angle 不带扣 无正反区分 SMD,P=0.5mm,Surface Mount，Right Angle FFC, FPC (Flat Flexible) Connector Assemblies ROHSXFCNFFC, FPC (Flat Flexible) Connector Assemblies
README
README.mdMIPI Mapper
Adapts between BM23PF0.8-40DP-0.35V microdisplay interface and 31-pin ribbon DSI. WIP.
Info
For ENGR 090 undergraduate engineering capstone project
Thomas Makin, Xezel Peshlakai, Swarthmore College Class of 2025
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | C_Small | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 2 | D_Schottky_Small | Diode_SMD:D_SOD-123 | D2, D3 |
| 1 | +5V5 Screen | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | +5V5 Src | TestPoint:TestPoint_Pad_1.0x1.0mm | TP10 |
| 1 | -6V Screen | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | -6V Src | TestPoint:TestPoint_Pad_1.0x1.0mm | TP11 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 130k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 3-2328724-1 | bacon:FPC-SMD_31P-P0.30_HDGC_0.3K-QX-31PWB | J1 |
| 1 | 51uH | Inductor_SMD:L_1812_4532Metric | L1 |
| 1 | BM23PF0.8-40DP-0.35V_51_ | bacon:BM23PF0840DS035V51-GOOD | J2 |
| 1 | F0504-H-06-10G-R | bacon:FFC-SMD_6P-P0.50_F0504-H-06-10G-R | FPC1 |
| 1 | GND Test | TestPoint:TestPoint_Pad_1.0x1.0mm | TP9 |
| 1 | ICM-42605 | footprints:LGA14_2P5X3X0P91_IVS | U1 |
| 1 | LTC3638xMSE | Package_SO:Analog_MSOP-12-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm | U3 |
The 29 most common of 31 parts.
Questions
How big is the E90-dsi split PCB?
It measures 36.2 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E90-dsi split use?
31 parts, built around the ICM-42605 and F0504-H-06-10G-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E90-dsi split KiCad files?
From the makinbacon21/mipi-mapper repository on GitHub, at the commit this page was made from: the board is v0/e90-dsi-split.kicad_pcb and its schematic breakout/breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the E90-dsi split design in my own project?
Its repository states no licence, so its author keeps all rights: ask makinbacon21 before reusing the design.
More from makinbacon21/mipi-mapper
1Similar boards
- 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 4 layers112.7 × 122 mm
- 6 layers46.5 × 47.2 mm
NAVCORE SoOP
kfilipekk/iridium_drone
STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler
217 parts2MIT - 4 layers10 × 32 mm
- 4 layers32.5 × 22 mm
Open PWM Gyro
jerinabr/Open-PWM-Gyro-Hardware
PWM gyro for fixed wing RC planes. Meant to be connected to an ELRS RX or other RX that outputs CRSF control data.
27 parts1 - 4 layers41.6 × 42 mm
IEE Drone 2026
CalebJM04/IEEE-2026-UAV
Drone project for IEEE 2026 UAV. Primarily created by Caleb Murray
54 parts - 4 layers73 × 56 mm
