4 layers18.1 × 18 mm
4 layers112.7 × 122 mm
Bluetera hardware repository
- Size
- 112.7 × 122 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 1,033
- Nets
- 77
- Pads
- 5,733
- Tracks, vias
- 11,700, 1,350
- Pours
- 100
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Jan 2020
- Updated
- 26 Jan 2020
Overview
Panel is an open-source printed circuit board by ioteratech, from the ioteratech/bluetera-hardware repository on GitHub, published under the MIT licence. It is a 4-layer board of 112.7 × 122 mm with 1,033 parts on 77 nets, routed with 11,700 tracks and 1,350 vias.
It is built around the BC840, LIS2MDL and ICM-42605, with the SP0504BAJTG among its other parts. Its parts include 375 capacitors, 225 resistors, 125 ICs, 125 diodes and 100 connectors.
Main components
4
BC840
LGA-64OTA空中升级、加密功能、硬件TRNG LGA-64 Bluetooth Modules ROHSFanstelBluetooth Modules
LIS2MDL
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 16bit 200uA I2C、SPI ±5mT ±5mT LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic Sensors
ICM-42605
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 7.5uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometers
SP0504BAJTG
SOT-35310V、13.5V 150W@8/20us 1uA 5V 6.7V 90pF ESD IEC 61000-4-2、IEC 61000-4-5 SOT-353 ESD and Surge Protection (TVS/ESD) ROHSLeiditechESD And Surge Protection (TVS/ESD)
README
README.md<img src=docs/images/iotera_logo.png width="10%" height="10%">
Bluetera Hardware
This repository contains the KiCad project for the Bluetera II and it's breakout adapter.
Bluetera is an open source IoT platform for the development of smart and connected products. The platform includes:
- Bluetera Hardware module (this repository)
- Bluetera Firmware - repository here
- Blutera SDK(s) - repositories here
More info available at our website: https://ioteratech.com
Parts
1,033| Qty | Value | Footprint | References |
|---|---|---|---|
| 75 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C12, C12, C12, C12, C12, C12, C12, C12, C12, C12, C12, C12, C12, C12, C12, C12 +59 |
| 50 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2 +34 |
| 50 | 10nF | Capacitor_SMD:C_0201_0603Metric | C14, C14, C14, C14, C14, C14, C14, C14, C14, C14, C14, C14, C14, C14, C14, C14 +34 |
| 50 | 10uF | Capacitor_SMD:C_0402_1005Metric | C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C10 +34 |
| 50 | 12pF | Capacitor_SMD:C_0402_1005Metric | C7, C7, C7, C7, C7, C7, C7, C7, C7, C7, C7, C7, C7, C7, C7, C7 +34 |
| 50 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 +34 |
| 50 | 27R | Resistor_SMD:R_0402_1005Metric | R5, R5, R5, R5, R5, R5, R5, R5, R5, R5, R5, R5, R5, R5, R5, R5 +34 |
| 50 | Conn_01x13 | Connector_PinHeader_1.27mm.pretty:PinHeader_1x13_P1.27mm_Vertical | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 +34 |
| 50 | D | Diode_SMD:D_SOD-523 | D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2, D2 +34 |
| 25 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5, C5 +9 |
| 25 | 10nF | Capacitor_SMD:C_0402_1005Metric | C15, C15, C15, C15, C15, C15, C15, C15, C15, C15, C15, C15, C15, C15, C15, C15 +9 |
| 25 | 180R | Resistor_SMD:R_0201_0603Metric | R11, R11, R11, R11, R11, R11, R11, R11, R11, R11, R11, R11, R11, R11, R11, R11 +9 |
| 25 | 1K | Resistor_SMD:R_0201_0603Metric | R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3 +9 |
| 25 | 2.2uF | Capacitor_SMD:C_0201_0603Metric | C3, C3, C3, C3, C3, C3, C3, C3, C3, C3, C3, C3, C3, C3, C3, C3 +9 |
| 25 | 220nF | Capacitor_SMD:C_0201_0603Metric | C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11, C11 +9 |
| 25 | 22K | Resistor_SMD:R_0402_1005Metric | R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R10 +9 |
| 25 | 360R | Resistor_SMD:R_0201_0603Metric | R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4, R4 +9 |
| 25 | 510R | Resistor_SMD:R_0402_1005Metric | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 +9 |
| 25 | BC840 | prints:BC840 | U4, U4, U4, U4, U4, U4, U4, U4, U4, U4, U4, U4, U4, U4, U4, U4 +9 |
| 25 | Battery Connector | Connector_JST.pretty:JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 +9 |
| 25 | CL-505S | prints:HSMF-C116 | D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4, D4 +9 |
| 25 | Crystal_Small | Crystal.pretty:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1, Y1 +9 |
| 25 | ICM-42605 | prints:ICM-42605 | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 +9 |
| 25 | LIS2MDL | prints:PQFN50P200X200X70-12N | U5, U5, U5, U5, U5, U5, U5, U5, U5, U5, U5, U5, U5, U5, U5, U5 +9 |
| 25 | LOGO | prints:iotera | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +9 |
| 25 | LTC4065 | Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.5mm_EP0.61x1.42mm | U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2 +9 |
| 25 | Red LED | LED_SMD:LED_0603_1608Metric | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 +9 |
| 25 | SP0504BAJT | Package_TO_SOT_SMD:SOT-353_SC-70-5 | D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6, D6 +9 |
| 25 | TCR2E | Package_TO_SOT_SMD:SOT-553 | U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3, U3 +9 |
| 25 | USB_B_Micro | prints:USB_Micro-B | J11, J11, J11, J11, J11, J11, J11, J11, J11, J11, J11, J11, J11, J11, J11, J11 +9 |
| 1 | fiducial | fiducial | e |
The 1,001 most common of 1,033 parts.
Questions
How big is the Panel PCB?
It measures 112.7 × 122 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Panel use?
1,033 parts, built around the BC840, LIS2MDL, ICM-42605 and SP0504BAJTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the ioteratech/bluetera-hardware repository on GitHub, at the commit this page was made from: the board is panel/panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from ioteratech/bluetera-hardware
2- 2 layers29 × 34.1 mm
Similar boards
- 4 layers41.6 × 42 mm
IEE Drone 2026
CalebJM04/IEEE-2026-UAV
Drone project for IEEE 2026 UAV. Primarily created by Caleb Murray
54 parts - 4 layers254.9 × 150.1 mm
- 6 layers19.4 × 36.3 mm
- 4 layers46 × 100 mm
MixedsignalBoard
TheodorosBalis/Mixed-Signal-PCB
Four-layer KiCad PCB for a GSM/GPRS handheld with STM32, Quectel M95, battery charging, LCD, SIM, keypad, and audio.
123 parts1 - 2 layers100 × 100 mm
- 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 6 layers46.5 × 47.2 mm
NAVCORE SoOP
kfilipekk/iridium_drone
STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler
217 parts2MIT