4 layers48 × 35 mm
2 layers15 × 19 mm
MAPusart
MakersAsylumIndia/MAPusartUSB to UART converter board using CP2102. Micro USB input and 6 pin header output.
- Size
- 15 × 19 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 11
- Pads
- 63
- Tracks, vias
- 108, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Dec 2014
- Updated
- 9 Dec 2014
Overview
MAPusart is an open-source printed circuit board by MakersAsylumIndia, from the MakersAsylumIndia/MAPusart repository on GitHub. It is a 2-layer board of 15 × 19 mm with 10 parts on 11 nets, routed with 108 tracks and 7 vias.
It is built around the USBLC6-2P6. Its parts include 2 capacitors, 2 diodes, 1 resistor, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdMAPusart
USB to UART converter board using CP2102. Micro USB input and 6 pin header output.
License
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | MAPusart.pretty:C_0805_HandSoldering | C9, C10 |
| 1 | 300E | MAPusart.pretty:R_0805_HandSoldering | R4 |
| 1 | CP210X | MAPusart.pretty:qfn-28 | U3 |
| 1 | FTDI | MAPusart.pretty:Socket_Strip_Angled_1x06 | H10 |
| 1 | LED_USB | MAPusart.pretty:LED-0805 | D4 |
| 1 | SCREW | MAPusart.pretty:MA_Logo2 | Z3 |
| 1 | SCREW | MAPusart.pretty:OSHW_6mm | Z5 |
| 1 | USB-Micro | MAPusart.pretty:USB_B_Micro | J3 |
| 1 | USBLC6-2 | MAPusart.pretty:SOT-23-6 | D1 |
Questions
How big is the MAPusart PCB?
It measures 15 × 19 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MAPusart use?
10 parts, built around the USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAPusart KiCad files?
From the MakersAsylumIndia/MAPusart repository on GitHub, at the commit this page was made from: the board is kicad/MAPusart.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAPusart design in my own project?
Its repository states no licence, so its author keeps all rights: ask MakersAsylumIndia before reusing the design.
Similar boards
- 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 4 layers70 × 72 mm
- 4 layers94.4 × 72.8 mm
RP2040 base
Twisted-Fields/rp2040-motor-controller
A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
325 parts419 - 4 layers70 × 54 mm
- 2 layers172 × 152.9 mm
- 4 layers95.6 × 73.6 mm
- 4 layers100 × 70 mm
ZSWatch Watch DevKit
ZSWatch/Watch-DevKit-HW
The hardware repo for the ZSWatch Development Kit.
132 parts188GPL-3.0