4 layers59.9 × 66.5 mm
2 layers95 × 30 mm
MAP append
MakersAsylumIndia/MAPone3A really bare bones Arduino using ATMega 328P DIP, SPI and Serial Interfaces and a few LEDs. Arduino stripped down to bare basics so everyone can afford it.
- Size
- 95 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 41
- Pads
- 195
- Tracks, vias
- 538, 7
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Nov 2014
- Updated
- 15 Mar 2016
Overview
MAP append is an open-source printed circuit board by MakersAsylumIndia, from the MakersAsylumIndia/MAPone repository on GitHub. It is a 2-layer board of 95 × 30 mm with 47 parts on 41 nets, routed with 538 tracks and 7 vias.
It is built around the ATMEGA328-PU and USBLC6-2P6. Its parts include 10 capacitors, 7 connectors, 5 diodes, 4 resistors and 3 ICs. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
USBLC6-2P6
SOT-666-6-40℃~+125℃ 150nA 17V 2 3.5pF 5.25V 5A@8/20us 6V ESD IEC 61000-4-2 Unidirectional SOT-666-6 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdMAPone
Maker's Asylum Project #1
A really bare bones Arduino using ATMega 328P DIP, SPI and Serial Interfaces and a few LEDs. Arduino stripped down to bare basics so everyone can afford it.
License
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | MAPone.pretty:C_0805_HandSoldering | C1, C3, C4, C5, C6 |
| 4 | CONN_1 | MAPone.pretty:vite_3mm | P1, P2, P3, P4 |
| 2 | 100n | MAPusart.pretty:C_0805_HandSoldering | C9, C10 |
| 2 | 22pF | MAPone.pretty:C_0805_HandSoldering | C7, C8 |
| 2 | 300E | MAPone.pretty:R_0805_HandSoldering | R2, R3 |
| 2 | CONN_1 | MAPone:OSHW_6mm | Z6, Z7 |
| 2 | CONN_1 | MAPone.pretty:MA_Logo2 | Z1, Z2 |
| 1 | 100u | MAPone.pretty:Elko_vert_11.2x6.3mm_RM2.5 | C2 |
| 1 | 10k | MAPone.pretty:R_0805_HandSoldering | R1 |
| 1 | 16MHz | MAPone.pretty:Crystal_HC49-U_Vertical_3Pin | X1 |
| 1 | 1N4007 | MAPone.pretty:Diode_DO-41_SOD81_Vertical_KathodeUp | D1 |
| 1 | 300E | MAPusart.pretty:R_0805_HandSoldering | R4 |
| 1 | 7805 | MAPone.pretty:LM78XXV | U1 |
| 1 | ANALOG | MAPone.pretty:Socket_Strip_Straight_1x06 | H4 |
| 1 | AREF | MAPone.pretty:Header_A_REF | H5 |
| 1 | ATMEGA328-P | MAPone.pretty:DIP-28__300_ELL_ZIF | U2 |
| 1 | BARREL_JACK | MAPone.pretty:JACK_ALIM | J1 |
| 1 | Blink | MAPone.pretty:LED-3MM | D3 |
| 1 | CP210X | MAPusart.pretty:qfn-28 | U3 |
| 1 | FTDI | MAPusart.pretty:Socket_Strip_Angled_1x06 | H10 |
| 1 | FTDI | MAPone.pretty:Header_FTDI | H8 |
| 1 | IO_H | MAPone.pretty:Socket_Strip_Straight_1x08 | H7 |
| 1 | IO_L | MAPone.pretty:Socket_Strip_Straight_1x08 | H6 |
| 1 | ISP | MAPone.pretty:Header_ICSP | H9 |
| 1 | LED_USB | MAPusart.pretty:LED-0805 | D4 |
| 1 | LiPo_7V2 | MAPone.pretty:Pin_Header_Straight_1x02 | H3 |
| 1 | PWR | MAPone.pretty:LED-3MM | D2 |
| 1 | Power | MAPone.pretty:Socket_Strip_Straight_1x06 | H2 |
| 1 | RST | MAPone.pretty:SW-PB | SW1 |
| 1 | SCREW | MAPusart.pretty:OSHW_6mm | Z5 |
| 1 | SCREW | MAPusart.pretty:MA_Logo2 | Z3 |
| 1 | USB-Micro | MAPusart.pretty:USB_B_Micro | J3 |
| 1 | USB-Micro | MAPone.pretty:USB_B_Micro | J2 |
| 1 | USBLC6-2 | MAPusart.pretty:SOT-23-6 | D1 |
| 1 | V_SEL | MAPone.pretty:Header_3 | H1 |
Questions
How big is the MAP append PCB?
It measures 95 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MAP append use?
47 parts, built around the ATMEGA328-PU and USBLC6-2P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAP append KiCad files?
From the MakersAsylumIndia/MAPone repository on GitHub, at the commit this page was made from: the board is kicad/gerber/MAP_append/MAP_append.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAP append design in my own project?
Its repository states no licence, so its author keeps all rights: ask MakersAsylumIndia before reusing the design.
Similar boards
- 2 layers104.9 × 75.2 mm
- 2 layers228 × 98 mm
- 2 layers94.6 × 46.1 mm
- 2 layers50 × 50 mm
- 2 layers284.7 × 94.2 mm
Lumberjack
peej/lumberjack-keyboard
5x12 ortholinear through-hole component keyboard PCB for standard 60% cases
165 parts403MIT - 2 layers132.1 × 45.7 mm
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers63.3 × 57.2 mm
