Skip to the content
2 layers45 × 45 mm555-doorbell, the printed circuit board in 3D

Taller introducción a la fabricación casera de circuitos impresos con materiales corrientes.

Size
45 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
10
Pads
38
Tracks, vias
69, 0
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
3 Jun 2017
Updated
3 Jun 2017

Overview

555-doorbell is an open-source printed circuit board by makers-upv, from the makers-upv/taller-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 45 × 45 mm with 15 parts on 10 nets, routed with 69 tracks and 0 vias.

It is built around the LM555N. Its parts include 5 capacitors, 4 resistors, 2 diodes, 1 IC and 1 connector. It belongs with the home automation and IoT boards of this library.

Main components

1

README

README.md

taller-pcb

Taller introducción a la fabricación casera de circuitos impresos con materiales corrientes.

Parts

15
QtyValueFootprintReferences
447kResistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4
310nCapacitors_ThroughHole:C_Disc_D7.5mm_W2.5mm_P5.00mmC1, C3, C4
210uCapacitors_ThroughHole:CP_Radial_D5.0mm_P2.50mmC2, C5
21N4148Diodes_ThroughHole:D_A-405_P5.08mm_Vertical_AnodeUpD1, D2
1CONN_01X02Connect:PINHEAD1-2P1
1LM555NHousings_DIP:DIP-8_W7.62mmU1
1SPEAKERBuzzers_Beepers:BUZZERSP1
1SW_PUSH_SMALL_HButtons_Switches_ThroughHole:SW_PUSH_6mmSW1

Similar boards

  • 2 layers120 × 70 mmBRNG, the printed circuit board in 3D

    BRNG

    valerionew/Banana-Random-Number-Generator

    Random number generator based on radioactivity from bananas

    93 parts37
  • 2 layers99.8 × 99.8 mmSoil moisture2x4, the printed circuit board in 3D

    Soil moisture2x4

    acolomitchi/cap-soil-moisture-v2

    Files for the capacitive soil moisture (2 kicad projects and 1 arduino sketch with dependencies)

    96 parts26
  • 2 layers81.3 × 45.7 mmSequencer, the printed circuit board in 3D

    Sequencer

    matiasmicheletto/openscad-oil-pumpjack

    3d models and electronics for a variable speed scale pumpjack

    6 parts9GPL-3.0
  • 2 layers263.1 × 136.6 mmVIC20Reloaded-1.1-002, the printed circuit board in 3D

    VIC20Reloaded-1.1-002

    RichCini/VIC-20-Reloaded

    Reimaging of the original VIC-20cr ("cost-reduced") main board in a smaller footprint.

    140 parts5
  • 2 layers99.7 × 71.5 mmSchrittMacher, the printed circuit board in 3D

    SchrittMacher

    c-base/c-ynth

    data collection and source files for synth

    92 parts2
  • 2 layers49.5 × 49.5 mmSMT4dummies, the printed circuit board in 3D

    SMT4dummies

    dsquaredrobotics/SMT4dummies

    An SMT soldering practice PCB

    63 parts2GPL-3.0
  • 2 layers160 × 124.7 mmBSPD, the printed circuit board in 3D

    BSPD

    formulaslug/fs-2-schematics

    Electrical design repository for the FS-2 racecar

    139 parts2
  • 2 layers38.4 × 28.2 mmBeacon, the printed circuit board in 3D

    Beacon

    ondra6ak/rocket-telemetry

    Radio beacon and parachute ingnition for a rocket

    12 parts2

Questions

How big is the 555-doorbell PCB?

It measures 45 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 555-doorbell use?

15 parts, built around the LM555N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 555-doorbell KiCad files?

From the makers-upv/taller-pcb repository on GitHub, at the commit this page was made from: the board is 555-doorbell/kicad-src/555-doorbell.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 555-doorbell design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).