
BRNG
valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas

Taller introducción a la fabricación casera de circuitos impresos con materiales corrientes.
555-doorbell is an open-source printed circuit board by makers-upv, from the makers-upv/taller-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 45 × 45 mm with 15 parts on 10 nets, routed with 69 tracks and 0 vias.
It is built around the LM555N. Its parts include 5 capacitors, 4 resistors, 2 diodes, 1 IC and 1 connector. It belongs with the home automation and IoT boards of this library.
Taller introducción a la fabricación casera de circuitos impresos con materiales corrientes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 47k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 3 | 10n | Capacitors_ThroughHole:C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C3, C4 |
| 2 | 10u | Capacitors_ThroughHole:CP_Radial_D5.0mm_P2.50mm | C2, C5 |
| 2 | 1N4148 | Diodes_ThroughHole:D_A-405_P5.08mm_Vertical_AnodeUp | D1, D2 |
| 1 | CONN_01X02 | Connect:PINHEAD1-2 | P1 |
| 1 | LM555N | Housings_DIP:DIP-8_W7.62mm | U1 |
| 1 | SPEAKER | Buzzers_Beepers:BUZZER | SP1 |
| 1 | SW_PUSH_SMALL_H | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW1 |

valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas

acolomitchi/cap-soil-moisture-v2
Files for the capacitive soil moisture (2 kicad projects and 1 arduino sketch with dependencies)

matiasmicheletto/openscad-oil-pumpjack
3d models and electronics for a variable speed scale pumpjack

RichCini/VIC-20-Reloaded
Reimaging of the original VIC-20cr ("cost-reduced") main board in a smaller footprint.




It measures 45 × 45 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the LM555N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the makers-upv/taller-pcb repository on GitHub, at the commit this page was made from: the board is 555-doorbell/kicad-src/555-doorbell.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).