Skip to the content
4 layers97.8 × 97.8 mmPTERODACTYL v4, the printed circuit board in 3D

UMD near-space PTERODACTYL KiCad sensor-board working design

Size
97.8 × 97.8 mm
Copper layers
4
Thickness
1.6 mm
Parts
51
Nets
67
Pads
175
Tracks, vias
246, 25
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
14 Oct 2026
Updated
21 Oct 2026

Overview

PTERODACTYL v4 is an open-source printed circuit board by mahruschow, from the mahruschow/team-pterodactyl repository on GitHub. It is a 4-layer board of 97.8 × 97.8 mm with 51 parts on 67 nets, routed with 246 tracks and 25 vias.

It is built around the C322C104K5R5TA, C322C106K3R5TA and MRS16000C6800FCT00, with the EEUFR1E101, MRS16000C1003FCT00 and MRS16000C2202FCT00 among its other parts. Its parts include 11 capacitors, 7 resistors, 5 ICs, 5 diodes and 4 connectors. It belongs with the sensors and measurement boards of this library.

Main components

12

README

README.md

Team PTERODACTYL

Working files for the UMD near-space PTERODACTYL sensor-board redesign. The current board is an imported v3.8 v11 baseline, not a completed next-launch design or a fabrication release.

Team handoff and planning

For a quick picture of progress and what's left, read docs/REMAINING_WORK.md. Start with docs/README.md for the shared planning directory, then current status and resume steps. The directory includes requirements, the development plan, session notes, the supplied parts workbook and native KiCad validation evidence so teammates can continue without the previous chat.

Step 3 now includes a project-local Pterodactyl_Modules library with draft BNO055 #2472/MS8607 #4716 carrier footprints with matching symbols, a Teensy SSW carrier, and an unassigned GPS #5440 logical symbol, plus documented connector/mounting proposals. They are not assigned to the main circuit. See the footprint review for pin mapping, validation and outstanding physical-fit requirements.

Step 5 adds a separate draft v4 schematic in Native_KiCad_v4/, built from the documented connection map and power architecture. It passes ERC with 0 violations and matches an independent net list, but it is not yet team-reviewed. Step 7 adds a placed (not yet routed) v4 PCB in the same project; see the draft layout. See the power architecture and schematic plan.

Open the design

Use KiCad 10 to open Native_KiCad_v11/PTERODACTYL_v3.8_v11.kicad_pro. The project contains a native KiCad schematic, PCB, imported symbol and footprint libraries, and project-local library tables. These files were converted from the supplied Autodesk Fusion/Eagle source; component choices and connectivity still need engineering review.

Folder or filePurpose
Native_KiCad_v11/Editable KiCad project and the saved October 7, 2026 PCB DRC report
Native_KiCad_v4/Draft v4 project: schematic (Step 5) and placed, unrouted PCB (Step 7); see docs/PCB_LAYOUT_V4.md
KiCad_import/Eagle XML schematic and board pair prepared for KiCad's Eagle importer
Original_Fusion_source/Supplied editable .f3z, .sch, and .brd files for comparison
Firmware_v4/Draft v4 logger firmware (Step 6); compiles for Teensy 4.1, not yet hardware-tested
Firmware_reference/Original v19 and v19.1 firmware archives from the supplied package; not validated for this redesign
Reference_Gerbers_v12_DO_NOT_ORDER/Historical Gerbers for revision comparison only
PTERODACTYL_V3.8_Setup_reference.pdfOriginal setup guide from the supplied package
CUSTOM_BOARD_BRIEF.mdSensor goals and decisions still to make

Current state

The imported PCB has approximately 97.79 × 97.79 mm outer dimensions, four copper layers, 39 footprints, 417 tracks, and two refilled copper zones. It uses a Teensy 4.1 baseline. A fresh KiCad 10.0.7 audit on October 18, 2026 reproduced 11 PCB DRC errors, 428 warnings, and 0 unconnected items. Schematic ERC reported 33 errors and 10 warnings, with 52 additional schematic/PCB parity warnings. These findings remain unresolved. See the validation report for triage and check limitations, and the development plan for next steps. The symbols, pin mapping, power architecture and exact module footprints still require engineering review.

The supplied Gerbers say v3.8 v12 while the editable Fusion source says v3.8 v11; the Gerber job metadata also contains a v3.7 identifier. Reconcile those revisions before using any prior files for fabrication.

Next-launch work

The intended board should log gyroscope, accelerometer, orientation, GPS, pressure, humidity, temperature, and derived altitude data. The working selection is Teensy 4.1 with Adafruit BNO055 2472, MS8607 4716 and PA1616D GPS 5440. The lead has specified no telemetry: record onboard to microSD for analysis after recovery. Saadat selected the core logger with power control, status LEDs and supply monitoring; OLED, remote probes, alternative IMU, heater and servos are outside this scope. Component placement must address interference. Battery/runtime, quantitative performance, enclosure/environment, exact control workflow and manufacturer constraints remain open. See CUSTOM_BOARD_BRIEF.md and the version-one requirements draft, which distinguishes the selected baseline from proposed behavior and open decisions.

Before fabrication: agree on the requirements and reference revision; review the schematic and all footprints against component datasheets; check power, pin mapping, routing, and board dimensions; resolve DRC/ERC failures; generate fresh Gerbers and drill files from the approved KiCad board; inspect them in a Gerber viewer; and obtain a hardware review and prototype test.

Collaborating

Clone this private repository, open the .kicad_pro file, and commit changes on a branch. Keep the KiCad project, schematic, PCB, and local libraries together. Do not commit editor lock files or local UI settings. Explain changes to connectors, sensors, pin mapping, and power in the commit or pull request so they can be checked against the schematic and firmware.

Do not send the reference Gerbers or this imported baseline directly to a manufacturer.

Parts

51
QtyValueFootprintReferences
5100nPterodactyl_Modules:KEMET_C322_100n_P5.00mmC2, C4, C7, C9, C11
410uPterodactyl_Modules:KEMET_C322_10u_P5.00mmC5, C6, C8, C10
4680Pterodactyl_Modules:Vishay_MRS16_P7.62mmR4, R5, R6, R7
4M3MountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
2100u 25VPterodactyl_Modules:Panasonic_EEUFR1E101_P2.50mmC1, C3
1+3V3TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP3
1+5VTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP2
1100kPterodactyl_Modules:Vishay_MRS16_P7.62mmR1
1100k 1%Pterodactyl_Modules:Vishay_MRS16_P7.62mmR2
110VDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
122k 1%Pterodactyl_Modules:Vishay_MRS16_P7.62mmR3
175R@100MHzPterodactyl_Modules:Laird_28L0138_P10.00mmFB1
1AO3401APterodactyl_Modules:AO3401A_SOT23_AISLERQ1
1Adafruit BNO055 #2472Pterodactyl_Modules:Adafruit_BNO055_2472_CarrierU3
1Adafruit MS8607 #4716Pterodactyl_Modules:Adafruit_MS8607_4716_CarrierU4
1Adafruit PA1616D #5440Pterodactyl_Modules:Adafruit_GPS_5440_CarrierU5
1BatteryPterodactyl_Modules:Molex_0022272021_AISLERJ1
1GNDTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP5
1GPS_RXDTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP9
1GPS_TXDTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP8
1GreenLED_THT:LED_D5.0mmD4
1I2C_SCLTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP7
1I2C_SDATestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP6
1ModeButton_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2QSW1
1OrangeLED_THT:LED_D5.0mmD5
1PTC 0.7A holdFuse:Fuse_Bourns_MF-RHT070F1
1Pololu S9V11F5Pterodactyl_Modules:Pololu_S9V11F5_SSW_CarrierU2
1Power switchPterodactyl_Modules:Molex_0022272021_AISLERJ2
1Pull-before-flightConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1RedLED_THT:LED_D5.0mmD2
1SENSOR_3V3TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP4
1Spare I/OConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4
1Teensy 4.1Pterodactyl_Modules:Teensy41_SSW_CarrierU1
1UserButton_Switch_THT:SW_PUSH_6mmSW2
1VBAT_PROTTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP1
1VBAT_SENSETestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP10
1YellowLED_THT:LED_D5.0mmD3

More from mahruschow/team-pterodactyl

1
  • 4 layers97.8 × 97.8 mmPTERODACTYL v3.8 v11, the printed circuit board in 3D

    PTERODACTYL v3.8 v11

    mahruschow/team-pterodactyl

    UMD near-space PTERODACTYL KiCad sensor-board working design

    39 parts2

Similar boards

  • 2 layers80 × 65 mmSmartlada revA, the printed circuit board in 3D

    Smartlada revA

    saschapo/smartlada

    Калибровочный стенд PWM на ESP8266 для умного светильника из фонаря ВАЗ-2106 (4x D4184, low-side)

    34 parts
  • 2 layers100 × 100 mmRegisters, the printed circuit board in 3D

    Registers

    imihajlow/ccpu

    A 8-bit computer made of 74xx series logic gates and memory ICs.

    217 parts145
  • 4 layers60 × 60 mm3117 AUSIGN, the printed circuit board in 3D

    3117 AUSIGN

    r4hulrr/ausign

    Real-time Auslan (Australian Sign Language) to English speech translation glove. Built with ESP32-S3, flex sensors, IMU on a custom PCB, and a Bluetooth-connected Python GUI.

    151 parts3MIT
  • 2 layers21.2 × 116.2 mmScroll dial, the printed circuit board in 3D

    Scroll dial

    maker-lukas/Scroll-Dial

    A scroll dial using the AS5600 sensor and a small macropad

    20 parts2
  • 2 layers134 × 80.5 mmETerrena, the printed circuit board in 3D

    ETerrena

    AyrXZ47/cansat1

    Codigo de la nueva version del Tuzo Cansat AEM-UAZ

    20 parts1GPL-3.0
  • 2 layers100 × 80 mmSpeakerpcb, the printed circuit board in 3D

    Speakerpcb

    gmaxdragon/Seizo-Noise

    A massive PCB for a speaker for my robotic arm with a microphone built into it and a ton of other GPIO ports.

    52 parts1
  • 2 layers100 × 100 mmTimerClock, the printed circuit board in 3D

    TimerClock

    kseebaldt/clock_rtc

    Arduino based etc clock

    33 parts1
  • 4 layers120 × 112 mmThorPBC2.0, the printed circuit board in 3D

    ThorPBC2.0

    sschuchman/thorCam

    46 parts1

Questions

How big is the PTERODACTYL v4 PCB?

It measures 97.8 × 97.8 mm and has 4 copper layers, 1.6 mm thick.

What parts does the PTERODACTYL v4 use?

51 parts, built around the C322C104K5R5TA, C322C106K3R5TA, MRS16000C6800FCT00 and EEUFR1E101. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PTERODACTYL v4 KiCad files?

From the mahruschow/team-pterodactyl repository on GitHub, at the commit this page was made from: the board is Native_KiCad_v4/PTERODACTYL_v4.kicad_pcb and its schematic Native_KiCad_v11/PTERODACTYL_v3.8_v11.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PTERODACTYL v4 design in my own project?

Its repository states no licence, so its author keeps all rights: ask mahruschow before reusing the design.