Skip to the content
2 layers100 × 80 mmSpeakerpcb, the printed circuit board in 3D

A massive PCB for a speaker for my robotic arm with a microphone built into it and a ton of other GPIO ports.

Size
100 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
52
Nets
63
Pads
211
Tracks, vias
431, 92
Pours
6
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Oct 2026
Updated
25 Oct 2026

Overview

Speakerpcb is an open-source printed circuit board by gmaxdragon, from the gmaxdragon/Seizo-Noise repository on GitHub. It is a 2-layer board of 100 × 80 mm with 52 parts on 63 nets, routed with 431 tracks and 92 vias.

It is built around the ESP32-S3-WROOM-1-N8R8, USBLC6-2SC6 and EEUFR1E471, with the OS102011MS2QN1, 1206L050/15YR and SJ1-3533NG among its other parts. Its parts include 17 resistors, 11 connectors, 10 capacitors, 3 ICs and 3 switches. It belongs with the audio and music boards and the ESP32 boards of this library.

Main components

6

README

v2_1/README.md

Seizo Noise v2.1 — CHECKED CAD / HOLD FOR PHYSICAL RELEASE

This project is the new, simpler 5V analog speaker/interface board for Seizo. It is not the old ESP32/12V board.

BOM price (listed parts only)

$34.46 USD estimated subtotal, 17 lines, including a provisional $4.00 bare PCB allowance. Shipping, tax, enclosure, mount hardware, actual 5V power-adapter requirements and missing supplies are not yet priced. This is not an order-ready/landed total. Open numeric BOM or full price table.

Open in KiCad

  1. Extract the complete ZIP into one folder (do not pull out just the PCB file).
  2. Open Seizo_Noise_v2.kicad_pro in KiCad 10.
  3. Open the schematic and PCB through the project manager, preserving Seizo_V2_Symbols.kicad_sym, Seizo_Noise_v2.pretty, the local library tables, and models/.
  4. To rerun checks, use Inspect -> Electrical Rules Checker in the schematic and Inspect -> Design Rules Checker in the PCB, with Refill zones and Test for schematic parity enabled.

Revision v2.1 moves the AUX jack closer to the board edge, shifts the volume shaft farther toward the right edge, corrects a discovered 10.0mm-vs-8.2mm potentiometer mounting-tab footprint mismatch, and enlarges the jack insertion slots; see docs/research/ENGINEERING_RELEASE_AUDIT.md.

The project was created from the user-uploaded sz2(1).kicad_sch and intentionally discarded its empty .kicad_pcb placeholder. The upload used 5V_AUDIO and +5V_AUDIO for different nets, leaving the amp connector without the intended protected supply; v2 merges them into the single +5V_AUDIO rail.

What it does

  • Audio from a Raspberry Pi or laptop goes to J4 (Same Sky SJ1-3533NG, 3.5mm stereo AUX).
  • R1/R2 (4.7k each) isolate and combine left and right to mono.
  • RV1 (Bourns PTV09A-2020F-A103) controls analog volume, and R3 (100k) pulls the amp input to ground.
  • External protected regulated 5V only enters J1. F1 is a 0.75A-hold PTC, D1 is a 1N5819 Schottky (PIN1/cathode on the downstream +5V rail), and C1/C2 stabilize the rail.
  • J3 connects by four labelled wires to the separately purchased Adafruit PAM8302 (product 2130): pin1 VIN, pin2 GND, pin3 A+, pin4 A−/GND.
  • The speaker attaches directly to PAM8302 SPK+/SPK−; do not run speaker output to J3 or board GND.
  • The USB microphone connects directly to the Pi, not to this board. The Pi performs speech recognition and Seizo's supervised action-validation process.

Native verification evidence

On KiCad CLI 10.0.7, first in the original local build and then again in a clean copied project directory:

  • ERC: 0 errors, 0 warnings.
  • DRC: 0 violations, 0 unconnected pads, 0 footprint errors with ground refill and schematic-to-PCB parity.
  • Independent pad/net comparison: 29 assigned electrical pad connections, no mismatches.
  • Board: 85 x 60 mm; 2 copper layers; nominal 1.6mm; 4 x M3 NPTH holes; 14 electrical footprints; 4 mounting footprints.
  • Routing: routed copper traces on B.Cu with a F.Cu GND pour; independent audited segment count is in validation/INDEPENDENT_RELEASE_AUDIT.json.
  • Drill preview: 31 plated holes (including three routed 2.2×1.1mm AUX plated slots and two oversized 3.3mm plated potentiometer mounting holes); 4 unplated 3.2mm M3 mounting holes; PTH/NPTH drills separate.

Updated reports are under validation/; the final v2.1 3D preview is docs/plots/Seizo_Noise_v2_1_CAD_RENDER.png. This is digital CAD validation only, not a physical or electrical functional demonstration. Existing KiCad ignored-check categories are disclosed in the reports; no new DRC exemption was added to hide copper/clearance faults.

Ordering status — HOLD

The fabrication/GERBERS_DRAFT_DO_NOT_ORDER folder is a complete native Gerber/drill preview. Do not send it to fabrication yet, even though KiCad checks pass. Exact procurement and mechanical-fit review must precede release; see docs/TOMORROW_HANDOFF.md and docs/ASSEMBLY_AND_TEST.md.

Purchasing lists from v1 are not valid for this new board. The user reports owning a 5V 1A adapter but its loaded voltage, connector fit and polarity have not been independently measured; remaining components and their physical fit are unverified. The 65-dollar Hack Club project target has not been reconciled as a delivered purchase quote.

Links to primary hardware documentation

AI assistance was used in this CAD revision for net correction, footprint generation, placement, routing, native checks, and documentation. This does not replace the author's KiCad work and does not claim assembled-hardware testing.

Parts

52
QtyValueFootprintReferences
1100kSeizo_Audio:R15_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR15
1100nFSeizo_Audio:C9_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC9
1100nFSeizo_Audio:C10_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC10
1100nFSeizo_Audio:C2_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC2
1100nFSeizo_Audio:C7_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC7
110kSeizo_Audio:R2_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR2
110kSeizo_Audio:R17_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR17
110kSeizo_Audio:R1_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR1
110kSeizo_Audio:RV1_Potentiometer_Bourns_PTV09A_2_Single_HorizontalRV1
110kSeizo_Audio:R13_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR13
110uFSeizo_Audio:C1_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC1
110uFSeizo_Audio:C5_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC5
118kSeizo_Audio:R14_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR14
11N5822Seizo_Audio:D1_D_DO_201AD_P15_24mm_HorizontalD1
11uFSeizo_Audio:C4_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC4
11uFSeizo_Audio:C3_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC3
12.2uFSeizo_Audio:C8_C_1206_3216Metric_Pad1_33x1_80mm_HandSolderC8
122Seizo_Audio:R5_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR5
122Seizo_Audio:R6_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR6
14.7kSeizo_Audio:R12_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR12
14.7kSeizo_Audio:R9_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR9
14.7kSeizo_Audio:R19_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR19
14.7kSeizo_Audio:R10_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR10
14.7kSeizo_Audio:R18_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR18
14.7kSeizo_Audio:R11_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR11
1470uFSeizo_Audio:C6_CP_Radial_D10_0mm_P5_00mmC6
15.1kSeizo_Audio:R3_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR3
15.1kSeizo_Audio:R4_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR4
16.8kSeizo_Audio:R16_R_1206_3216Metric_Pad1_30x1_75mm_HandSolderR16
1AMP_AUDIO_OUTSeizo_Audio:J5_PinHeader_1x02_P2_54mm_VerticalJ5
1AMP_POWER_INSeizo_Audio:J3_TerminalBlock_Phoenix_MKDS_1_5_2_5_08_1x02_P5_08mm_HorizontalJ3
1AMP_POWER_OUTSeizo_Audio:J4_TerminalBlock_Phoenix_MKDS_1_5_2_5_08_1x02_P5_08mm_HorizontalJ4
1AUDIO_SELECTSeizo_Audio:SW3_SW_Slide_SPDT_Straight_CK_OS102011MS2QSW3
1BOOTSeizo_Audio:SW2_SW_PUSH_6mmSW2
1ESP32-S3-WROOM-1-N8R8Seizo_Audio:U1_ESP32_S3_WROOM_1_GroundDrill_030U1
1I2C_SENSOR_3V3Seizo_Audio:J12_PinHeader_1x04_P2_54mm_VerticalJ12
1INMP441_MICSeizo_Audio:J9_PinHeader_1x06_P2_54mm_VerticalJ9
1M3 screwSeizo_Audio:H1_MountingHole_3_2mm_M3H1
1M3 screwSeizo_Audio:H4_MountingHole_3_2mm_M3H4
1M3 screwSeizo_Audio:H2_MountingHole_3_2mm_M3H2
1M3 screwSeizo_Audio:H3_MountingHole_3_2mm_M3H3
1MINI 2A 32V + holderSeizo_Audio:F2_Fuseholder_Blade_Mini_Keystone_3568F2
1PCM5102_ANALOGSeizo_Audio:J7_PinHeader_1x03_P2_54mm_VerticalJ7
1PCM5102_DIGITALSeizo_Audio:J6_PinHeader_1x05_P2_54mm_VerticalJ6
1PI_UART_BACKUPSeizo_Audio:J11_PinHeader_1x03_P2_54mm_VerticalJ11
1PTC 0.5A hold 15VSeizo_Audio:F1_Fuse_1206_3216Metric_Pad1_42x1_75mm_HandSolderF1
1Pololu D24V10F3 3.3VSeizo_Audio:U2_Pololu_D24V10F3_SocketU2
1RESETSeizo_Audio:SW1_SW_PUSH_6mmSW1
1SJ1-3533NGSeizo_Audio:J8_Jack_3_5mm_CUI_SJ1_3533NG_HorizontalJ8
1ULTRASONIC_SENSORSeizo_Audio:J10_PinHeader_1x04_P2_54mm_VerticalJ10
1USBLC6-2SC6Seizo_Audio:U3_SOT_23_6U3
1USB_C_Receptacle_USB2.0_16PSeizo_Audio:J1_USB_C_Receptacle_GCT_USB4085J1

More from gmaxdragon/Seizo-Noise

1
  • 2 layers85 × 60 mmSeizo Noise v2, the printed circuit board in 3D

    Seizo Noise v2

    gmaxdragon/Seizo-Noise

    A massive PCB for a speaker for my robotic arm with a microphone built into it and a ton of other GPIO ports.

    18 parts1

Similar boards

  • 2 layers70 × 64 mmWindpcb, the printed circuit board in 3D

    Windpcb

    lindestad/wind-controller

    LINDESTAD simracing wind controller: ESP32-C3 Zephyr firmware, KiCad PCB and SimHub integration

    82 parts
  • 4 layers160 × 145 mmCarrier, the printed circuit board in 3D

    Carrier

    OrbitalCommons/gumstick

    Gumstick: ESP32 + iCE40UP5K FPGA module (v1 DF40 board-to-board, v2 M.2 gold-finger draft) and its programming carrier. KiCad 10.

    222 parts1MIT
  • 4 layers35 × 22 mm3-3V Regulator, the printed circuit board in 3D

    3-3V Regulator

    johnktaylor/protoworks-kicad-3-3v-regulator

    A 3.3v Regulator and USB-C breakout board licensed under CERN-OHL-W-2.0

    24 partsCERN-OHL-W-2.0
  • 4 layers63.9 × 37.1 mmUsbhid daq, the printed circuit board in 3D

    Usbhid daq

    shraken/usbhid_buddy

    Hardware, firmware, and software for the USBHID DAQ 'Buddy' device

    73 parts2
  • 2 layers63.5 × 101.6 mmVULCAN REVB, the printed circuit board in 3D

    VULCAN REVB

    UND-ARC/IREC-ARC-2024

    UND ARC Launch Vehicle for Spaceport America Cup 2024

    63 parts1MIT
  • 2 layersPanic button, the printed circuit board in 3D

    Panic button

    HenraL/panic_button

    This is an attempt at creating a box that aims to allow you to broacast your location to someone close like the other deivces (air tag, tile, etc) but as it is not a brand and uses the internet instead of ble and an…

    43 partsMIT
  • 2 layers22 × 25.5 mmUSB C 3V3 Interface Board, the printed circuit board in 3D

    USB C 3V3 Interface Board

    ehasunchy/kicad-pcb-projects

    KiCad PCB design portfolio featuring ESP32 IoT hardware, power regulation, USB interfaces, schematics, PCB layouts, and manufacturing files.

    15 parts
  • 4 layers124.6 × 68.7 mmOssc board, the printed circuit board in 3D

    Ossc board

    marqs85/ossc_pcb

    ossc pcb design files

    265 parts163

Questions

How big is the Speakerpcb PCB?

It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Speakerpcb use?

52 parts, built around the ESP32-S3-WROOM-1-N8R8, USBLC6-2SC6, EEUFR1E471 and OS102011MS2QN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Speakerpcb KiCad files?

From the gmaxdragon/Seizo-Noise repository on GitHub, at the commit this page was made from: the board is hardware/speakerpcb.kicad_pcb and its schematic hardware/speakerpcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Speakerpcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask gmaxdragon before reusing the design.