

RBMS Prototype
- Size
- 124.9 × 97.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 56
- Pads
- 177
- Tracks, vias
- 291, 14
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 9 May 2023
- Updated
- 9 May 2023
Overview
RBMS Prototype is an open-source printed circuit board by mahmudulislam299, from the mahmudulislam299/KiCad_RBMS_Prototype repository on GitHub. It is a 2-layer board of 124.9 × 97.6 mm with 52 parts on 56 nets, routed with 291 tracks and 14 vias.
It is built around the MAX232N, AMS1117-3.3 and LM1117-ADJ. Its parts include 17 capacitors, 12 resistors, 8 ICs, 8 connectors and 1 diode. It belongs with the ESP32 boards of this library.
Main components
3MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM1117-ADJ
SOT-2231 1.2V~5V 1.3V@(1000mA) 15V 1A 2mA Adjustable Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.mdRBMS_Prototype

Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C6, C10, C11, C12, C13, C14, C15, C16 |
| 3 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R11, R12 |
| 3 | 220uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C7, C8 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 2 | 2.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6 |
| 2 | 4V4 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J5 |
| 2 | rs232 port | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6, J8 |
| 1 | logo:pranisheba_logo | ||
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 1uF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C17 |
| 1 | 32.786 kHZ | Crystal:Crystal_Round_D1.0mm_Vertical | Y1 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 3v3_in | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | 3v3_out | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 43k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J3 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_104_1x23mm | BT1 |
| 1 | Buzzer DIP | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | DS1307 DIP | Package_DIP:DIP-8_W7.62mm | U6 |
| 1 | ESP32-DEVKIT-V1 | ESP32-DEVKIT-V1:MODULE_ESP32_DEVKIT_V1 | U4 |
| 1 | LED | LED_THT:LED_D4.0mm | D1 |
| 1 | LM1117-ADJ | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MAX232 | Package_DIP:DIP-16_W7.62mm | U7 |
| 1 | P2N2222A | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | SIM800L DIP | SIM800L-Core-Module-KiCad-Footprint:SIM800L-CORE | U8 |
| 1 | SW_Push DIP | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW1 |
| 1 | TH_2200uF | Capacitor_THT:C_Radial_D12.5mm_H25.0mm_P5.00mm | C9 |
| 1 | W25Q64 DIP | Package_DIP:DIP-8_W7.62mm | U5 |
| 1 | YAAJ_DCDC_StepDown_LM2596 | LM2596_module:YAAJ_DCDC_StepDown_LM2596 | U3 |
| 1 | max232 port | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
Similar boards
- 2 layers100 × 80 mm

- 2 layers240 × 194 mm

Infinitas
freeDSP/freeDSP-INFINITAS
USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.
1,020 parts35 - 2 layers134.6 × 106.4 mm

Renovation ssi 2001
roybaer/renovation_ssi_2001
Innovation SSI-2001 replica that can be built without vintage components
95 parts26 - 2 layers53 × 42.5 mm

- 2 layers144.8 × 101.6 mm

Stebus
laurent-fr/z180
This is my attempt to create a 80's style computer based on the Zilog Z180 CPU
89 parts5 - 2 layers99.9 × 99.8 mm

GR BreadBoardBuddy
GadgetReboot/Breadboard_Buddy
PCB with power supplies, audio amp, LEDs, pots and level shifters to make breadboarding easier.
161 parts3 - 2 layers100.1 × 100.1 mm

AMP PCBv2
Autonomous-Motorsports-Purdue/AMP_PCBv2
Files relating to version 2 of the PCB for AMP kart
116 parts1 - 2 layers70 × 66 mm

Questions
How big is the RBMS Prototype PCB?
It measures 124.9 × 97.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RBMS Prototype use?
52 parts, built around the MAX232N, AMS1117-3.3 and LM1117-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RBMS Prototype KiCad files?
From the mahmudulislam299/KiCad_RBMS_Prototype repository on GitHub, at the commit this page was made from: the board is RBMS_Prototype.kicad_pcb and its schematic RBMS_Prototype.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RBMS Prototype design in my own project?
Its repository states no licence, so its author keeps all rights: ask mahmudulislam299 before reusing the design.