2 layers
2 layers
RCShield
Maddimax/MadControl1OpenSource remote control
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 43
- Pads
- 269
- Tracks, vias
- 314, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 4 May 2014
- Updated
- 12 Jun 2014
Overview
RCShield is an open-source printed circuit board by Maddimax, from the Maddimax/MadControl repository on GitHub. It is a 2-layer board with 37 parts on 43 nets, routed with 314 tracks and 16 vias.
It is built around the TCA9535PW. Its parts include 18 resistors, 7 connectors, 2 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdThis contains all the files necessary to build your own Remote control ( or rather will soon )
Hardware
The schematics and pcb files were created with KiCad
Software
All code was written with the standard Arduino IDE
BOM
Contains a list of all the components necessary
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10k | SM1206 | R1, R2, R3, R4, R5, R6, R7, R11, R12, R13, R14, R15, R16, R17, R18, R19 +2 |
| 5 | C | SM1206 | 0.1uf1, 0.1uf2, 2.2uf1, 10uf1, 10uf2 |
| 2 | 1,5k | SM1206 | 1,5k1, R10 |
| 1 | ACH01 | PIN_ARRAY-6X1 | P6 |
| 1 | ACH23 | PIN_ARRAY-6X1 | P5 |
| 1 | ACH45 | PIN_ARRAY-6X1 | P4 |
| 1 | ACH67 | PIN_ARRAY-6X1 | P3 |
| 1 | ARDUINO_MEGA_SHIELD | ARDUINO_MEGA_SHIELD_SMD | SHIELD2 |
| 1 | ARDUINO_SHIELD | ARDUINO_SHIELD_SMD | SHIELD1 |
| 1 | IN-PORT0 | pin_array_8x2 | P1 |
| 1 | IN-PORT1 | pin_array_8x2 | P2 |
| 1 | LTC2309 | tssop-20 | U1 |
| 1 | PPM_OUT | PIN_ARRAY_3X1 | K1 |
| 1 | TCA9535 | tssop-24 | U2 |
| 1 | Vinput | PIN_ARRAY_2X1 | P7 |
Questions
What parts does the RCShield use?
37 parts, built around the TCA9535PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RCShield KiCad files?
From the Maddimax/MadControl repository on GitHub, at the commit this page was made from: the board is Hardware/RCShield/RCShield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RCShield design in my own project?
Its repository states no licence, so its author keeps all rights: ask Maddimax before reusing the design.
More from Maddimax/MadControl
4- 2 layers
- 2 layers
- 2 layers
Similar boards
- 6 layers178 × 118 mm
MoriShield Carrier 6L
aswinserigreen/morishield_hardware
all components bom , pcb layouts and schematics of morishield is maintained here
157 parts - 2 layers40 × 34 mm
- 2 layers53.9 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
37 parts1kGPL-3.0 - 2 layers52 × 51.8 mm
Esp32-homeassistant rf bridge
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
37 parts915 - 2 layers87.8 × 59.8 mm
FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers65 × 28 mm
BMS Cell Module
stuartpittaway/diyBMS
Do it yourself battery management system for Lithium ion battery packs/cells
37 parts676GPL-3.0 - 2 layers48 × 32 mm
FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
37 parts575GPL-2.0 - 2 layers38.1 × 153.7 mm
