2 layers
2 layers
RCShield Mod
Maddimax/MadControl1OpenSource remote control
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 19
- Pads
- 143
- Tracks, vias
- 90, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 4 May 2014
- Updated
- 12 Jun 2014
Overview
RCShield Mod is an open-source printed circuit board by Maddimax, from the Maddimax/MadControl repository on GitHub. It is a 2-layer board with 14 parts on 19 nets, routed with 90 tracks and 11 vias.
Its parts include 4 resistors, 4 connectors, 2 capacitors, 1 diode and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdThis contains all the files necessary to build your own Remote control ( or rather will soon )
Hardware
The schematics and pcb files were created with KiCad
Software
All code was written with the standard Arduino IDE
BOM
Contains a list of all the components necessary
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1.5k | SM1206 | R2, R3 |
| 2 | 10k | SM1206 | R1, R19 |
| 1 | 1000uF | C1V5H | C1 |
| 1 | 220uF | C1V5H | C2 |
| 1 | ANALOG_EXT | PIN_ARRAY_4x1_MIXED2 | P1 |
| 1 | ARDUINO_MEGA_SHIELD | ARDUINO_MEGA_SHIELD_SMD | SHIELD2 |
| 1 | ARDUINO_SHIELD | ARDUINO_SHIELD_SMD | SHIELD1 |
| 1 | DIGI_EXT | PIN_ARRAY_5x1_MIXED3 | P2 |
| 1 | DIODE | DO-214AC(SMA) | D1 |
| 1 | PPM_OUT | PIN_ARRAY_3X1_BIG | K1 |
| 1 | Vinput | PIN_ARRAY_2X1_BIG | P7 |
| 1 | Vswitch | PIN_ARRAY_2X1_BIG | P3 |
Questions
What parts does the RCShield Mod use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RCShield Mod KiCad files?
From the Maddimax/MadControl repository on GitHub, at the commit this page was made from: the board is Hardware/RCShield-Mod/RCShield-Mod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RCShield Mod design in my own project?
Its repository states no licence, so its author keeps all rights: ask Maddimax before reusing the design.
More from Maddimax/MadControl
4- 2 layers
- 2 layers
- 2 layers
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
