
Rave Controller
D3stan/EV-Controller
ESP32-based exhaust valve controller for 2 stroke motorcycle.

Specs are probably off and I need to add the tuned values that filters out switching ringing.
MOSFET PPMOD is an open-source printed circuit board by madcat101010, from the madcat101010/MOSFET_PPMOD repository on GitHub. It is a 2-layer board of 48.8 × 63.5 mm with 11 parts on 6 nets, routed with 247 tracks and 221 vias.
It is built around the TC4422ESM and IRF100P218. Its parts include 6 connectors, 2 resistors, 1 capacitor, 1 IC and 1 transistor.
PROJECT: MOSFET_PPMod
REV: 1.0
AUTHOR: ROBIN Y
DATE: XX XXX 20XX
PCB SOFTWARE: KiCAD X.X.X
DIMENSIONS: 1,920 mil x 2,500 mil
LAYERS: 2
Basic MOSFET based pulsed power module. Old design. Just putting it on Github for personal archiving.
Specs are probably off and I need to add the tuned values that filters out switching ringing.
Custom foorprints in .pretty included.
This is an open source hardware project. No warranties or guarantees. Use this design at your own risk!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | MOSFET_PPMOD:M5_STUD | P3, P4, P5, P6 |
| 2 | CONN_01X02 | Connectors_JST:JST_XH_B02B-XH-A_02x2.50mm_Straight | P1, P2 |
| 1 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 2.7 | Capacitors_SMD:C_0805_HandSoldering | R2 |
| 1 | 2k | Capacitors_SMD:C_0805_HandSoldering | R1 |
| 1 | IRF100P218 | MOSFET_PPMOD:TO-247-3_Specced | Q1 |
| 1 | TC4422 | MOSFET_PPMOD:TO-220-5_Specced | U1 |

D3stan/EV-Controller
ESP32-based exhaust valve controller for 2 stroke motorcycle.

aguscsc/Model-Predictive-Control-Strategies-for-Fourth-Order-Power-Converters
This repository contains the design an implementation of a SEPIC (Single-Ended Primary-Inductor Converter) to test and compare the application of model predictive control on fourth-order power converters.


JavierVarasDominguez/TFG-Boost-Fotovoltaico-JavierVaras
Archivos de simulación, diseño y control utilizados en la realización del trabajo fin de grado.

Joe-Purvis/UFE
This repository consolidates multiple projects into a single monorepo for the Ultrasound Smart Switch system.



It measures 48.8 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the TC4422ESM and IRF100P218. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the madcat101010/MOSFET_PPMOD repository on GitHub, at the commit this page was made from: the board is MOSFET_PPMOD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask madcat101010 before reusing the design.