2 layers96.8 × 97 mm
Psoc5power
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
133 parts59
2 layers61 × 27.3 mm
Motor speed controller
Madarakante/motor-speed-controllerKiCad: 555 timer-based PWM motor speed controller for fume extractor
- Size
- 61 × 27.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 10
- Pads
- 36
- Tracks, vias
- 89, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Sep 2026
- Updated
- 16 Sep 2026
Overview
Motor speed controller is an open-source printed circuit board by Madarakante, from the Madarakante/motor-speed-controller repository on GitHub. It is a 2-layer board of 61 × 27.3 mm with 14 parts on 10 nets, routed with 89 tracks and 10 vias.
It is built around the IRF540N. Its parts include 3 capacitors, 3 resistors, 3 diodes, 2 connectors and 1 IC. It belongs with the robots and motor control boards of this library.
Main components
1Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1, J2 |
| 1 | .01u | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3 |
| 1 | .1u | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C1 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R2 |
| 1 | 1000u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1 |
| 1 | ICM7555xB | Package_DIP:CERDIP-8_W7.62mm_SideBrazed_LongPads | U1 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
Similar boards
- 2 layers124.5 × 77.5 mm
- 2 layers55 × 90.8 mm
- 2 layers73.7 × 61 mm
- 2 layers
- 4 layers147.8 × 77 mm
2xBLDCPicoV3
AmericanRework/Pico-2x-BLDC
One RP2040 Pico drives two brushless motors! SimpleFOC + Halls + 2304 drivers + TO-220 mosfets or IGBTs. Plugs directly into 450x automower motors.
135 parts7 - 2 layers
PCB Layout
chgopireddy/Full-Bridge-Class-D-Audio-Amplifier
LTspice Model for Full Bridge Class D, Voltage Mode Control, Peak Current Mode Control
63 parts6 - 2 layers147.2 × 58.3 mm
Li IonBatteryProtection
cnobile2012/Li-IonBatteryProtection
Circuit to protect Li-Ion and Li-Po batteries at the cell level.
81 parts6MIT
Questions
How big is the Motor speed controller PCB?
It measures 61 × 27.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Motor speed controller use?
14 parts, built around the IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Motor speed controller KiCad files?
From the Madarakante/motor-speed-controller repository on GitHub, at the commit this page was made from: the board is Motor_Speed_Controller.kicad_pcb and its schematic Motor_Speed_Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Motor speed controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask Madarakante before reusing the design.