

Pmod qqspi
QQSPI Pmod-compatible 32MB PSRAM module
- Size
- 30 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 18
- Pads
- 82
- Tracks, vias
- 282, 34
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Jan 2022
- Updated
- 14 Sep 2023
Overview
Pmod qqspi is an open-source printed circuit board by machdyne, from the machdyne/qqspi repository on GitHub. It is a 2-layer board of 30 × 20.3 mm with 18 parts on 18 nets, routed with 282 tracks and 34 vias.
Its parts include 11 capacitors and 5 ICs.
README
README.mdQQSPI Pmod™ compatible module
The QQSPI module provides access to four Quad SPI devices via a 12-pin Pmod™ compatible interface.

This repo contains schematics, pinouts and example Verilog code for the LD-QQSPI-PSRAM32 module.
Find more information on the LD-QQSPI-PSRAM32 product page.
Modes
| PMOD/SS | PMODCS0 | PMODCS1 | -> | QSPI1/CE | QSPI2/CE | QSPI3/CE | QSPI4/CE |
|---|---|---|---|---|---|---|---|
| H | X | X | -> | H | H | H | H |
| L | L | L | -> | L | H | H | H |
| L | H | L | -> | H | L | H | H |
| L | L | H | -> | H | H | L | H |
| L | H | H | -> | H | H | H | L |
Pinout
| Pin | Signal |
|---|---|
| 1 | /SS (active low) |
| 2 | SIO0 (MOSI) |
| 3 | SIO1 (MISO) |
| 4 | SCK |
| 5 | GND |
| 6 | 3V3 |
| 7 | SIO2 |
| 8 | SIO3 |
| 9 | CS0 |
| 10 | CS1 |
| 11 | GND |
| 12 | 3V3 |
License
The contents of this repo are released under the Lone Dynamics Open License with the following exceptions:
-
The KiCad design files contain parts of the kicad-pmod library which is released under the Apache License, Version 2.0.
-
The KiCad design files may contain symbols and footprints released under other licenses; please contact us if we've failed to give proper attribution.
Note: You can use these designs for commercial purposes but we ask that instead of producing exact clones, that you either replace our trademarks and logos with your own or add your own next to ours.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C6, C8, C10 |
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric | C3, C5, C7, C9, C11 |
| 4 | ESP-PSRAM32 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 74LS138 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | LOGO | LD-LOGO:ld-kicad | G*** |
| 1 | PMOD-Device-x2-Type-1A-GPIO | pmod-conn_6x2:pmod_pin_array_6x2 | PMOD1 |
Similar boards
- 2 layers27.9 × 16.5 mm

- 2 layers42.7 × 13.7 mm

Stm32-mini12864
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
18 parts1.1kGPL-3.0 - 2 layers41.2 × 46.6 mm

- 2 layers44 × 51.3 mm

4272MAVcoder R4
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
18 parts915 - 2 layers28.3 × 14.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
18 parts716GPL-3.0 - 2 layers20.3 × 15.2 mm

L0 stepper driver
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
18 parts546MIT - 2 layers

- 2 layers42.5 × 28.8 mm

C5VRX JACK DIY V2
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
18 parts515GPL-3.0
Questions
How big is the Pmod qqspi PCB?
It measures 30 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pmod qqspi use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pmod qqspi KiCad files?
From the machdyne/qqspi repository on GitHub, at the commit this page was made from: the board is pcb/qqspi_v2/pmod_qqspi.kicad_pcb and its schematic pcb/qqspi_v2/pmod_qqspi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pmod qqspi design in my own project?
Its repository states no licence, so its author keeps all rights: ask machdyne before reusing the design.